Pelco manual Mounting the FT82041/FR82041 Module Using the Wall Clip

Mounting the FT82041/FR82041 Module Using the Wall Clip

NOTE: Before mounting the FT82041/FR82041 module to a wall, ensure that there is adequate space at both ends for viewing the front-panel LEDs and for making the various rear-panel cable connec- tions.

To attach the FT82041/FR82041 module to a wall using the supplied wall clip, refer to Figure 5 and do the following:

1.Using the two vertical or horizontal wall-mounting holes, attach the wall clip to a wall using two screws (not provided).

2.Slide the module into the clip until the two holes on the bottom of the module align with the two holes on the lower flange of the clip.

3.Attach the module to the clip using the two Phillips pan head screws provided for the clip.

UPPER

FLANGE

VERTICAL

MOUNTING HOLE (2)

HORIZONTAL

MOUNTING HOLE (2)

SCREW, PHILLIPS	LOWER
	FLANGE
PAN HEAD WITH	WALL CLIP
LOCK WASHER (2)

Figure 5. Mounting the FT82041/FR82041 Module Using the Wall Clip

14 C2623M (2/07)