Pelco FR82041 manual Front Panel, RK5000PS-5U rack mount chassis, 100BASE-FX Status LED

Page 9

OPTIONAL ACCESSORIES

The following optional accessories are available:

WM5001-3U	Wall mount base kit for single-width module
WM5001-3UEXP	Wall mount expansion kit for single-width module
RK5000-3U	19-inch rack mount chassis for 14 slots (no power), 3 RUs
RK5000PS-3U	19-inch rack mount chassis for 12 slots with power, 3 RUs
EPS5000-120	External rack power supply, 1 RU, dual 120 W power outputs
RK5001B-3U	Blank filler panel, single width
RK5002B-3U	Blank filler panel, double width
RK5001-1UEXP	Adapter kit that allows a 3 RU single-width fiber module to be used in
	RK5000PS-5U rack mount chassis

FRONT PANEL

Figure 2 illustrates the front panel of the FT82041 and FR82041 modules.

FT82041FR82041

Figure 2. Front Panel of FT82041 and FR82041 Modules

ìReset Button: Restarts the unit

î100BASE-FX Status LED

ïOptic Fault LED: Optical signal status/laser status indicator

ñPower LED: Pelco badge

For detailed information about the front-panel LEDs, refer to Troubleshooting on page 17.

C2623M (2/07)

9

Image 9

Contents FT82041/FR82041 Unmanaged Ethernet Switch Page Contents List of IllustrationsList of Tables Important Safety Instructions Risk of Electric Shock Do not Open Radio and Television Interference Regulatory NoticesDescription Product OverviewModels Multimode ModelsSingle-Mode Models*† Front Panel Power LED Pelco badgeRK5000PS-5U rack mount chassis 100BASE-FX Status LEDRear Panel 10BASE-T/100BASE-TX Ports 1-4 RJ-45 connectorsPackage Contents InstallationAutonegotiation is enabled by default Flow control default setting10BASE-T/100BASE-TX Modes of Operation Mounting the FT82041/FR82041 Module Into a Rack MountingMounting the FT82041/FR82041 Module Using the Wall Clip 10BASE-T/100BASE-TX connections ConnectionsFiber connection Troubleshooting Meaning Possible Cause Corrective Action Optic Fault LED Desired, refer to Setting Table C. Troubleshooting with Rear-Panel IndicatorsAmber 10BASE-T link is If 10BASE-T operation is Established 11 for informationMeaning Possible Cause Corrective Action If half-duplex mode is Refer to SettingAmber Port is set to Flashing amber Port is set to Normal or excessiveGreen Port is set to If 100BASE-TX full-duplex Duplex mode LinkFlashing green Port is set to 100BASE-TX halfTable C. Troubleshooting with Rear-Panel Indicators Link/activity and speed, duplex/collision and speed SpecificationsReceiver Model Number Wavelength Optical Maximum Transmit/ReceiveEnd Multimode 62.5/125 μmIllustrates RJ-45 MDI/MDI-X connector pinouts Appendix. RJ-45 Connector PinoutsProduct Warranty and Return Information ISO9001