Pelco FR82041 manual Product Overview, Description

Product Overview

DESCRIPTION

The FT82041/FR82041 unmanaged Ethernet switch provides four 10BASE-T/100BASE-TX ports and one 100BASE-FX fiber port for the transport of bidirectional Ethernet data. Designed for point-to-point applications, the FT82041 and FR82041 switches are used in combination with one another to provide wavelength compatibility (refer to Figure 1).

FOUR 10/100 Mbps	FOUR 10/100 Mbps
CONNECTIONS	CONNECTIONS
FT82041	FR82041
	ONE
	FIBER

Figure 1. FT82041 and FR82041 Point-to-Point Application

Features of the FT82041/FR82041 Ethernet data transmission system include the following:

•User-selectable networking functions for each 10BASE-T/100BASE-TX port:

–Autonegotiation between 10 Mbps and 100 Mbps data rates and between full-duplex and half-duplex modes

–10 Mbps or 100 Mbps selectable

–Full-duplex or half-duplex mode selectable

–Enabling/disabling of flow control

NOTE: The 100BASE-FX fiber port is automatically forced to full-duplex 100 Mbps operation.

•Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent Interface Crossover) operation

•Compliant with IEEE 802.3, 802.3u, 802.3x standards

•Multimode fiber support for distances up to 2 km

•Single-mode fiber support for distances up to 46 km

•Integrated wavelength division multiplexing (WDM), which allows bidirectional data to be transmitted in a single fiber

•Laser diode for transmission of optical signals

NOTE: The FT82041/FR82041 switch is a Class 1 laser product that complies with FDA radiation performance standard 21CFR Subchapter J and with IEC 60825-1 Edition 1.2, 2001-08.

•Compatible with other Ethernet equipment:

–10BASE-T/100BASE-TX compatibility with all Pelco© and third-party 10BASE-T/ 100BASE-TX Ethernet devices

–Fiber optic compatibility with all Pelco Ethernet devices that support WDM

•Environmentally hardened

C2623M (2/07) 7