Pelco FR82041 manual Specifications, Link/activity and speed, duplex/collision and speed

Specifications

PERFORMANCE
Switch Type	Unmanaged Layer 2
Switch Method	Store and forward
Switch Fabric	Non-head-of-line blocking
Data Rate	10/100 Mbps
Compliance	IEEE 802.3, 802.3u, 802.3x
Interface	Auto MDI/MDI-X
Operating Mode	Full-duplex or half-duplex
Address Table Size	1,024 MAC address entries with automatic learning and aging
Quality of Service	IEEE 802.1p priority, tag-based, 4 queues per port,
	weighted fair queuing scheduling
Maximum Frame Size	Untagged Ethernet frames up to 1,518 bytes
	Tagged Ethernet frames up to 1,522 bytes
GENERAL
Operating Temperature	-40° to 167°F (-40° to 75°C)
Input Power Requirements	12 VDC or 24 VAC, 0.50 A
LED Indicators	Power
	100BASE-FX port status (link/activity, FEFI)
	Optic Fault (optic signal/laser status)
	10BASE-T/100BASE-TX port status (2 LEDs per port:
	link/activity and speed, duplex/collision and speed)
Dimensions	8.75" D x 1.08" W x 4.81" H
	(22.23 x 2.74 x 12.22 cm)
Unit Weight	1.6 lb (0.73 kg)
MECHANICAL
Connectors
Rack Power/Alarm	1, 4-pin connector
Stand-Alone Power	1, 2-pin connector, screw terminal
Electrical	4, RJ-45, 10BASE-T/100BASE-TX
Fiber Optic	1, single-fiber ST or SC

24 C2623M (2/07)