Schneider Electric 5000 User Configurable Items, Function, Factory, User Selectable, Description

Contents Smart-UPS RT Uninterruptible Power Supply3000/5000/6000 VA 200-240 Vac Tower/Rack Mount 3U User ManualPage Read the Safety Guide before installing the UPS SpecificationsINSTALLATION IntroductionWiring and Connecting the UPS CONNECTING THE BATTERY MODULES AND ATTACHING THE FRONT BEZEL power outlet connectorWhen connecting grounding cable, disconnect the unit from the utility Use only interface kits supplied or approved by APC2. Avoid using extension cords OPERATION The UPS starts a self-test as part of this procedure. The self-test On Battery Operationdoes not affect the voltage display FUNCTION USER CONFIGURABLE ITEMSDEFAULT FACTORYAdhere to National and local electrical codes when wiring the EPO 9 bits per second 9 data - bits 9 parity - none 9 stop bit Services9 flow control - none 5000/6000 VA models Be careful during battery replacement, the battery modules are heavy Replacing the Battery ModuleMAINTENANCE AND TRANSPORT X YZ \The batterys may remain in the UPS Disconnecting the Battery for TransportREPLACING BATTERY MODULES SOLUTION TROUBLESHOOTING, SERVICE, AND WARRANTY INFORMATIONPROBLEM AND POSSIBLE CAUSEREPLACE BATTERY LED ILLUMINATES FAULT AND OVERLOAD LEDS ILLUMINATE, UPS EMITS A SUSTAINED ALARM TONEFAULT LED ILLUMINATES UPS OPERATES ON BATTERY ALTHOUGH NORMAL LINE VOLTAGE EXISTSService Limited WarrantyRadio Frequency Warnings APC Worldwide Customer SupportREGULATORY