▼To Test the Installation With the SunVTS Software
Use the the SunVTS software to test a disk on a
For details about running the the SunVTS software, refer to the SunVTS 5.X User’s Guide and the SunVTS 5.X Test Reference Manual.
1.As superuser, open the SunVTS window.
#/opt/SUNWvts/bin/sunvts
2.From the System Map, select a disk drive that is in an array connected to the host adapter.
3.Start the disk test.
4.Verify that no errors have occurred by checking the SunVTS status window.
5.If no problems occur, stop the SunVTS software. Your host adapter is now ready to run applications.
Note – If problems occur, please contact your service provider for assistance.
10 Sun StorEdge