Network Technologies SM-8X4-HDA operation manual How To Use The IRT, Change the Switch

Page 30

NTI AUDIO/HD VIDEO MATRIX SWITCH

How To Use The IRT

The IRT-64X32 enables the user to control the connections of up to 32 input ports and 16 output ports on up to four (4) separate NTI video matrix switches. When any key is pressed, the IRT will power ON. A number key should always be pressed first unless a change to the configuration is desired (see "Set Configuration" on page 28). When a number key is pressed the LCD will display that number blinking. What to press next depends on what action is desired;

•change the switch to be controlled

•change the output port

•change the input port

Note: The user must always change or confirm the output port first and the input port second

If the "SYS", "IN" or "OUT" key is pressed first, the LCD will display the current switch followed by the decimal point and an error signal "EE". The error signal will display because there is no number to be displayed. A number key must always be pressed before a "SYS", "IN" or "OUT" key is pressed.

Exception: The "SYS" key is pressed first when setting the configuration. (See page 28)

Power ON with SYS, IN or OUT keys

Power ON with "2" key

Change the Switch

Press the number of the switch to be controlled. The number selected will be blinking in the last digit.

FYI: If the user realizes that an invalid number has been introduced before pressing either the "SYS", "IN", or "OUT" buttons, a correction can be made by pressing the correct number. If the correct number is a single digit, it must be preceded by a "0" to make the correction.

Press the "SYS" key. The blinking number will become blank and the switch number will update.

Note: If the number entered is larger than 4, when the "SYS" key is pressed the LCD will display the current switch and the error signal "EE".

26

Page 29 Page 31
Image 30
Page 29 Page 31
Contents
SM-8X4-HDA Trademark Table of Contents Table of Figures Materials Default User Name and PasswordsIntroduction CablesFeatures and Functions FrontViewofVEEMUX-AInstallation Connect the SourcesConnect the Devices +L- R+RConnect RS232 Connect to the EthernetPower Up Plug in and power upEscape back to the main display Used to enter numbers. # Control OptionsFront Panel LCD with Keypad Control Output user number can be enteredMenu Button Volume ControlMemory Functions Saving ConnectionsScan Mode Baud Rate RS232 ControlRemote Connection Unit AddressCommand Protocol Command Good Response Description StringSerTest- RS232 Interface Test Program Main OptionsSetup Options Matrix OperationsEthernet Operations Command Reply Description Telnet InterfaceTelnet 192.168.1.1 NTI AUDIO/HD Video Matrix Switch Enter the Password Web InterfaceVideo Switch Web interface Video SwitchAudio Switch Web interface Audio SwitchSetup Pages Web interface SetupWeb interface Serial Setup Input NamesScan Mode Output NamesUpdate Firmware Web interface Update FirmwareHelp Change PasswordUpdate Web Server LogoutDevice Discovery Tool Device Discovery ToolKeypad Features And FunctionsInfrared Control LCD DisplayHow To Use The IRT Change the SwitchPower on with SYS, in or OUT keys Power on with 2 key Change Output Port Change Input PortSet Configuration Troubleshooting the IRT Battery ReplacementSpecifications Replace slide cover on unitRS232 Connection Cables Pinout of RS232 port on VEEMUX-APinouts for typical DCE to DTE cable for CPU connection Arrows indicate signal direction Safety StatementsWiring Schematic of Matrix-Y-1 cable Pinout for Matrix Y-1 CableRack Mounting Instructions Mount the VEEMUX-A to a rackSpecifications Problem TroubleshootingWarranty Information Solution
Related manuals
Manual 38 pages 5.96 Kb