Sun Microsystems 816-7727-10 manual Checklist of 4-Post Rackmounting Tasks

■“Secure the Cords and Cables to the Cable Management Arm” on page 25

■“Install Optional Components” on page 28

■“Connecting the Cords and Cables” on page 29

■“Connect the Power Cords to the Server” on page 30

■“Connect Twisted-Pair Ethernet Cables” on page 32

■“Restore the Cabinet” on page 34

For a detailed list of 4-post cabinet requirements, turn to the section, “4-Post Cabinet Requirements” on page 52.

Checklist of 4-Post Rackmounting Tasks

Step	Task	Refer to This Section
1	Install the inner glides on the	“Attach the Inner Glides to the Chassis” on
	chassis.	page 9
2	Prepare the cabinet.	“Prepare the Cabinet” on page 10
3	Locate the mounting holes.	“Locate the Mounting Holes” on page 11
4	Install the slide assemblies into	“Install the Slide Assemblies” on page 13
	the cabinet.

5Install the server into the cabinet.

6Install the cable management arm.

“Install the Server Into the Cabinet” on page 16

“Install the Cable Management Arm” on page 20

7	Secure the cords and cables to the	“Secure the Cords and Cables to the Cable
	cable management arm.	Management Arm” on page 25
8	Install optional components.	“Install Optional Components” on page 28
9	Connect the power cords.	“Connect the Power Cords to the Server” on
		page 30
10	Connect a twisted-pair Ethernet	“Connect Twisted-Pair Ethernet Cables” on
	(TPE) cable.	page 32
11	Restore the cabinet.	“Restore the Cabinet” on page 34

6 Sun Fire V440 Server Installation Guide • July 2003