Connect the Power Cords to the Server
1.Unlock and open the right system door.
2.Insert the system key into the system control keyswitch.
Note that you have two sizes of system keys. The smaller key enables you to close the system door even while the key is in the system control keyswitch. The door cannot be closed with the larger key in the keyswitch.
3.Turn the system control keyswitch to the Standby position.
Standby 
HDD 3 |
|
PS 0 | PS 1 |
HDD 2 |
|
HDD 1 |
|
HDD 0 |
|
4.Slide the server out of the rack far enough to give you convenient access to the back of the server.