Sun Microsystems X2100 manual Installing Solaris 10 OS Operating System Drivers from a CD

Page 49

a.Type the following command at the system prompt:

%init 3

b.Log in as superuser.

c.Repeat Step 4 and Step 5.

7.Eject the CD after the driver installation completes.

8.Reboot the server.

2.4.2.2Installing Solaris 10 OS Operating System Drivers from a CD

The following instructions are for installing drivers if you are performing a fresh installation of the Solaris 10 operating system. You do not need to reinstall the drivers if you are using the preinstalled version of the operating system.

1.Remove the currently installed operating system from the server. See Section 5., “Run the installation script by typing the following command:” on page 2-14.

2.If necessary, set up the BIOS for Solaris operating system installation. See Section 5., “Run the installation script by typing the following command:” on page 2-14.

3.Install the operating system.

4.Install the drivers as shown in the following procedure.

To install the drivers and mount the diagnostic partition when running the Solaris 10 Operating System:

1.Log in to the Sun Fire X2100 Server as superuser.

2.Insert the Sun Fire X2100 Server Supplemental CD into the DVD drive. The CD is automounted by the Solaris 10 Operating System.

3.Change to the /cdrom/cdrom0/drivers/sx86 directory by typing the following command:

#cd /cdrom/cdrom0/drivers/sx86

Chapter 2 Software Installation 2-15

Image 49

Contents Sun Fire X2100 Server Getting Started Guide Please Recycle Contents Setting Up the Preinstalled Software Software InstallationContents Vi Sun Fire X2100 Server Getting Started Guide May How This Book Is Organized PrefaceTypographic Conventions Shell PromptsRelated Documentation Sun Welcomes Your Comments Third-Party Web SitesSafety and Compliance Information System SetupStart Planning the Installation ProcessPackage Contents Inventory Installing the Server Into a Rack With Optional Slide-Rails Unpack the slide-rails Disassembling the Slide-Rails Before Installation3Aligning the Mounting Bracket With the Server Chassis Installing the Mounting Brackets Onto the ServerAttaching the Slide-Rail Assemblies to the Rack Repeat and for the remaining slide-rail assembly5Setting the Rail Width 6Extending the Anti-tip Foot Installing the Server Into the Slide-Rail AssembliesYou will hear an audible click Installing the Cable Management Assembly 12Sun Fire X2100 Server Getting Started Guide April Right slide-rail CMA mounting bracket Right slide- rail assembly CMA slide-rail connector System Setup Attaching and Routing Cables Install cables to your server, as requiredPosition the cable hangers snap them into place. See Route the cables through the CMA cable hangersVerifying Operation of the Slide-Rails and CMA Cabling the ServerBack Panel 15Interconnecting Servers Interconnecting ServersFront Panel Powering On the ServerPowering Off the Server Using Serial Console Redirection Eeprom console=text /usr/dt/bin/dtconfig -e 24Sun Fire X2100 Server Getting Started Guide April Preparing for Installation Software Installation1Installation Flow Diagram Setting up the Bios for Operating System Installation Erasing the Primary Boot Hard DiskSetting up the Bios for Windows 2003 or Solaris 10 OS Setting up the Bios for a Linux Operating System Installing the Operating SystemRunning the up2date Utility Installing the Drivers Over a Network Installing Drivers and Mounting the Diagnostic PartitionChange to the /etc/dfs directory Create a Shared Drivers DirectoryOpen the dfstab file in a text editor Add the following line to the dfstab file/export/home/drivers directory is now on the network as At the command prompt typeLog in as root superuser on the hostname system Add the following line to the end of the dfstab fileCreate a Shared Drivers Directory on a Windows System Type the following command at the promptCopy the Drivers from the Supplemental CD Login as superuser Type the following at the command line Install the Drivers onto the Target Sun Fire X2100 ServerIii. Select Map Network Drive Type the appropriate command to install the drivers Install the Drivers on a Target Windows SystemLog in to the Sun Fire X2100 Server as superuser Installing Linux Operating System Drivers From a CDRun the installation script by typing the following command Type the following command at the system prompt Installing Solaris 10 OS Operating System Drivers from a CDLog in as superuser Run the install script by typing the following command Installing RAID Drivers Using the 2003Reburn Script Installing RAID Drivers Using a Boot Diskette Where OS is 200332 or Installing Windows 2003 Drivers Specify the driver location as C\NVIDIA\Ethernet 22Sun Fire X2100 Server Getting Started Guide April Solaris 10 Operating System Solaris 10 Operating System Configuration Overview1Installation Process Flow Diagram Reboot the system Configuration Instructions1Information for Preinstalled Solaris 10 Configuration Java Enterprise System Http//docs.sun.com Http//docs.sun.com Sun Studio Software8Sun Fire X2100 Server Getting Started Guide April P E N D I X a \ risetup.exe Adding the Nvida Ethernet Drivers to the Windows Image Remove the following entry from the ristndrd.sif file Adding Other Drivers and Modifying Setting FilesUnattended DriverSigningPolicy = Ignore Add the following entries to the ristndrd.sif fileTo unzip the package, type the following command \ net Stop binlsvc c\ net Start binlsvc Installing Windows 2003 Server 64-bit onto the RIS Server Ultra20WindowsXP64-bit 10Sun Ultra 20 Workstation Getting Started Guide April Drivers audio nic sataide smbus OemDir \ copy cdromdrive\drivers\windows\xp64\chipset\*.zip c\temp Either power on or reboot the server Installing a RIS Image onto a Client Server14Sun Ultra 20 Workstation Getting Started Guide April