Sun Microsystems X2100 manual Solaris 10 Operating System

Page 57

C H A P T E R 3

Setting Up the Preinstalled Software

This chapter contains information on the software preinstalled on standard Sun Fire X2100 Server configurations that have installed hard drives.

This chapter contains the following sections:

■Section 3.1, “Solaris 10 Operating System” on page 3-1

■Section 3.2, “Java Enterprise System” on page 3-5

■Section 3.3, “Sun Studio Software” on page 3-7

3.1Solaris 10 Operating System

The Solaris 10 Operating System is preinstalled on all Sun Fire X2100 Servers. This section contains instructions on configuring the operating system and using the software installed on the system.

3.1.1Solaris 10 Operating System Configuration Overview

The Solaris Operating System version installed on your server requires no licensing fee. If you install a different version of Solaris software, you might be required to pay a licensing fee for the new software version. The Sun Fire X2100 Server requires Solaris 10 (HW 1), or a subsequent compatible version of Solaris software. For more information, refer to the following web site:

http://wwws.sun.com/software/solaris/licensing/index.html

3-1

Image 57

Contents Sun Fire X2100 Server Getting Started Guide Please Recycle Contents Setting Up the Preinstalled Software Software InstallationContents Vi Sun Fire X2100 Server Getting Started Guide May How This Book Is Organized PrefaceTypographic Conventions Shell PromptsRelated Documentation Sun Welcomes Your Comments Third-Party Web SitesSafety and Compliance Information System SetupStart Planning the Installation ProcessPackage Contents Inventory Installing the Server Into a Rack With Optional Slide-Rails Unpack the slide-rails Disassembling the Slide-Rails Before Installation3Aligning the Mounting Bracket With the Server Chassis Installing the Mounting Brackets Onto the ServerAttaching the Slide-Rail Assemblies to the Rack Repeat and for the remaining slide-rail assembly5Setting the Rail Width 6Extending the Anti-tip Foot Installing the Server Into the Slide-Rail AssembliesYou will hear an audible click Installing the Cable Management Assembly 12Sun Fire X2100 Server Getting Started Guide April Right slide-rail CMA mounting bracket Right slide- rail assembly CMA slide-rail connector System Setup Attaching and Routing Cables Install cables to your server, as requiredPosition the cable hangers snap them into place. See Route the cables through the CMA cable hangersVerifying Operation of the Slide-Rails and CMA Cabling the ServerBack Panel 15Interconnecting Servers Interconnecting ServersFront Panel Powering On the ServerPowering Off the Server Using Serial Console Redirection Eeprom console=text /usr/dt/bin/dtconfig -e 24Sun Fire X2100 Server Getting Started Guide April Preparing for Installation Software Installation1Installation Flow Diagram Erasing the Primary Boot Hard Disk Setting up the Bios for Operating System InstallationSetting up the Bios for Windows 2003 or Solaris 10 OS Setting up the Bios for a Linux Operating System Installing the Operating SystemRunning the up2date Utility Installing the Drivers Over a Network Installing Drivers and Mounting the Diagnostic PartitionChange to the /etc/dfs directory Create a Shared Drivers DirectoryOpen the dfstab file in a text editor Add the following line to the dfstab file/export/home/drivers directory is now on the network as At the command prompt typeLog in as root superuser on the hostname system Add the following line to the end of the dfstab fileCreate a Shared Drivers Directory on a Windows System Type the following command at the promptCopy the Drivers from the Supplemental CD Install the Drivers onto the Target Sun Fire X2100 Server Login as superuser Type the following at the command lineIii. Select Map Network Drive Type the appropriate command to install the drivers Install the Drivers on a Target Windows SystemLog in to the Sun Fire X2100 Server as superuser Installing Linux Operating System Drivers From a CDRun the installation script by typing the following command Installing Solaris 10 OS Operating System Drivers from a CD Type the following command at the system promptLog in as superuser Run the install script by typing the following command Installing RAID Drivers Using the 2003Reburn Script Installing RAID Drivers Using a Boot Diskette Where OS is 200332 or Installing Windows 2003 Drivers Specify the driver location as C\NVIDIA\Ethernet 22Sun Fire X2100 Server Getting Started Guide April Solaris 10 Operating System Solaris 10 Operating System Configuration Overview1Installation Process Flow Diagram Reboot the system Configuration Instructions1Information for Preinstalled Solaris 10 Configuration Java Enterprise System Http//docs.sun.com Http//docs.sun.com Sun Studio Software8Sun Fire X2100 Server Getting Started Guide April P E N D I X a \ risetup.exe Adding the Nvida Ethernet Drivers to the Windows Image Remove the following entry from the ristndrd.sif file Adding Other Drivers and Modifying Setting FilesUnattended DriverSigningPolicy = Ignore Add the following entries to the ristndrd.sif fileTo unzip the package, type the following command \ net Stop binlsvc c\ net Start binlsvc Installing Windows 2003 Server 64-bit onto the RIS Server Ultra20WindowsXP64-bit 10Sun Ultra 20 Workstation Getting Started Guide April Drivers audio nic sataide smbus OemDir \ copy cdromdrive\drivers\windows\xp64\chipset\*.zip c\temp Either power on or reboot the server Installing a RIS Image onto a Client Server14Sun Ultra 20 Workstation Getting Started Guide April