Sun Microsystems X2100 manual Installing Windows 2003 Drivers

Page 54

9.Attach a USB diskette drive to the server.

10.Insert a Windows 2003 32-bit or 64-bit installation CD into the DVD drive.

11.When prompted, press the F6 key to install the third-party RAID driver.

12.Press the S key and Enter to specify additional drivers and insert the diskette.

13.Select the NVIDIA NForce Storage Controller.

14.Press the S key and Enter to specify additional drivers.

15.Select the NVIDIA RAID CLASS DRIVER.

16.Press the Enter key to continue the Windows 2003 installation.

17.When the OS installation is complete, install the NVDIA display and chipset drivers as explained in “Installing Windows 2003 Drivers” on page 20.

2.4.2.4Installing Windows 2003 Drivers

Note – If you have used the 2003Reburn option to create a Windows 2003 CD containing the drivers, you do not need to install these drivers.

To install the Windows drivers from a CD, do the following:

1.Insert the Sun Fire X2100 Server Supplemental CD into the DVD drive.

2.Install the chipset drivers:

a.Change the directory on the Supplemental CD by typing the following command at a DOS prompt:

C:\> D:

D:\> cd \DRIVERS\WINDOWS\OS\CHIPSET

Where OS is 2003_32 or 2003_64.

b. Copy the .zip file in this directory to C:\NVIDIA.

c.Unzip the file.

d.Open the Windows Device Manager as follows:

i.Click on the Start button.

ii.Right click on the My Computer menu item, and select Message from the drop down menu.

2-20Sun Fire X2100 Server Getting Started Guide • April 2006

Image 54

Contents Sun Fire X2100 Server Getting Started Guide Please Recycle Contents Software Installation Setting Up the Preinstalled SoftwareContents Vi Sun Fire X2100 Server Getting Started Guide May Preface How This Book Is OrganizedShell Prompts Typographic ConventionsRelated Documentation Third-Party Web Sites Sun Welcomes Your CommentsSystem Setup Safety and Compliance InformationPlanning the Installation Process StartPackage Contents Inventory Installing the Server Into a Rack With Optional Slide-Rails Disassembling the Slide-Rails Before Installation Unpack the slide-railsInstalling the Mounting Brackets Onto the Server 3Aligning the Mounting Bracket With the Server ChassisRepeat and for the remaining slide-rail assembly Attaching the Slide-Rail Assemblies to the Rack5Setting the Rail Width Installing the Server Into the Slide-Rail Assemblies 6Extending the Anti-tip FootYou will hear an audible click Installing the Cable Management Assembly 12Sun Fire X2100 Server Getting Started Guide April Right slide-rail CMA mounting bracket Right slide- rail assembly CMA slide-rail connector System Setup Position the cable hangers snap them into place. See Install cables to your server, as requiredAttaching and Routing Cables Route the cables through the CMA cable hangersCabling the Server Verifying Operation of the Slide-Rails and CMABack Panel Interconnecting Servers 15Interconnecting ServersPowering On the Server Front PanelPowering Off the Server Using Serial Console Redirection Eeprom console=text /usr/dt/bin/dtconfig -e 24Sun Fire X2100 Server Getting Started Guide April Software Installation Preparing for Installation1Installation Flow Diagram Erasing the Primary Boot Hard Disk Setting up the Bios for Operating System InstallationSetting up the Bios for Windows 2003 or Solaris 10 OS Installing the Operating System Setting up the Bios for a Linux Operating SystemRunning the up2date Utility Installing Drivers and Mounting the Diagnostic Partition Installing the Drivers Over a NetworkOpen the dfstab file in a text editor Create a Shared Drivers DirectoryChange to the /etc/dfs directory Add the following line to the dfstab fileLog in as root superuser on the hostname system At the command prompt type/export/home/drivers directory is now on the network as Add the following line to the end of the dfstab fileType the following command at the prompt Create a Shared Drivers Directory on a Windows SystemCopy the Drivers from the Supplemental CD Install the Drivers onto the Target Sun Fire X2100 Server Login as superuser Type the following at the command lineIii. Select Map Network Drive Install the Drivers on a Target Windows System Type the appropriate command to install the driversInstalling Linux Operating System Drivers From a CD Log in to the Sun Fire X2100 Server as superuserRun the installation script by typing the following command Installing Solaris 10 OS Operating System Drivers from a CD Type the following command at the system promptLog in as superuser Run the install script by typing the following command Installing RAID Drivers Using the 2003Reburn Script Installing RAID Drivers Using a Boot Diskette Where OS is 200332 or Installing Windows 2003 Drivers Specify the driver location as C\NVIDIA\Ethernet 22Sun Fire X2100 Server Getting Started Guide April Solaris 10 Operating System Configuration Overview Solaris 10 Operating System1Installation Process Flow Diagram Configuration Instructions Reboot the system1Information for Preinstalled Solaris 10 Configuration Java Enterprise System Http//docs.sun.com Sun Studio Software Http//docs.sun.com8Sun Fire X2100 Server Getting Started Guide April P E N D I X a \ risetup.exe Adding the Nvida Ethernet Drivers to the Windows Image Adding Other Drivers and Modifying Setting Files Remove the following entry from the ristndrd.sif fileAdd the following entries to the ristndrd.sif file Unattended DriverSigningPolicy = IgnoreTo unzip the package, type the following command \ net Stop binlsvc c\ net Start binlsvc Installing Windows 2003 Server 64-bit onto the RIS Server Ultra20WindowsXP64-bit 10Sun Ultra 20 Workstation Getting Started Guide April Drivers audio nic sataide smbus OemDir \ copy cdromdrive\drivers\windows\xp64\chipset\*.zip c\temp Installing a RIS Image onto a Client Server Either power on or reboot the server14Sun Ultra 20 Workstation Getting Started Guide April