TABLE 2-1 Rack Compatibility
Item | Requirement |
|
|
Clearance depth behind front | Distance to rear cabinet door is at least 800 mm (31.5 |
mounting plane | inches) with the cable management arm, or 700 mm |
| (27.5 inches), without the cable management arm. |
Clearance width between front and rear mounting planes
Server Dimensions
Distance between structural supports and cable troughs is at least 456 mm (18 inches).
Length: (not including PSU handle): 28.0 inches (711.2 mm)
Width: (not including ears): 16.75 inches (425.5 mm)
Height: 1U
Caution – Always load equipment into a rack from the bottom up so that it will not become
Caution – Ensure that the temperature in the rack does not exceed the server’s maximum ambient rated temperatures. Consider the total airflow requirements of all equipment installed in the rack to ensure that the equipment is operated within its specified temperature range.
Preparing the Slide Rails and Server for Installation
Disassembling Slide-Rails
Do one of the following procedures before installation:
■“Disassembling
■“Disassembling
Chapter 2 Installing the Sun Fire X4150 Server Into a Rack with | 11 |