Sun Microsystems X4150 manual 1Installation Worksheet

Installation Worksheet

Fill in TABLE 4-1with information you need to configure the preinstalled Solaris 10 OS for the server. Collect only the information that applies to your system.

TABLE 4-1Installation Worksheet

Installation Information	Description	Enter System Configuration:
		Asterisk (*) indicates default.
Language	Choose from the list of available languages	English*
	for the Solaris 10 software.
Locale	Choose your geographic region from the list	English
	of available locales.	(C - 7-bit ASCII)*
Terminal	Choose the type of terminal that you are
	using from the list of available terminal
	types.

Network connection	Is the system connected to a network?
DHCP	Can the system use Dynamic Host
	Configuration Protocol (DHCP) to configure
	its network interfaces?

Networked

Non-networked*

Yes

No*

If you are not	IP address	If you are not using DHCP, supply the IP
using DHCP,		address for the system.
note the network		Example: 129.200.9.1
address.
	Subnet	If you are not using DHCP, is the system
		part of a subnet?
		If yes, what is the netmask of the subnet?
		Example: 255.255.255.0
	IPv6	Do you want to enable IPv6 on this
		machine?

255.255.255.0 *

Yes

No*

Host name	A host name that you choose for the system.
Kerberos	Do you want to configure Kerberos security
	on this machine?
	If yes, gather the following information:
	Default Realm:
	Administration Server:
	First KDC:
	(Optional) Additional KDCs:

Yes

No*

Chapter 4 Configuring the Preinstalled Solaris 10 Operating System 47