Sun Microsystems X4150 manual Remote Console, Application, Client-side Secure, Shell application

Page 41

TABLE 3-2Embedded LOM Service Processor Components

Item

Port

Function

 

 

 

1ELOM hardware ELOM includes the following hardware components:

An embedded SP chipset. The service processor monitors the status and configuration of field-replaceable components inside your server, such as fans, disk drives, and power supplies.

Two back panel external connections: NET MGT Ethernet Connection, and serial management port/RJ-45 serial port.

2ELOM firmware Several system management firmware applications are preinstalled on the SP chipset. These operating system-independent firmware applications provide the following system management interfaces into your server:

Web-based graphical interface

Secure Shell (SSH) command-line interface

IPMI v2.0 CLI

Simple Network Management Protocol (SNMP) v3 interface

 

 

These interfaces call the same underlying system management functions on your

 

 

SP. You can work with one or more of these interfaces to integrate with other

 

 

management interfaces running in your data center.

3

Remote Console

The Remote Console application allows remote clients to view the graphical

 

application

console of your host server as though they were directly attached to its video

 

 

connector. The Remote Console mirrors the video display from the server VGA

 

 

device (up to 1280 x 1024 resolution) locally on the remote management system.

 

 

The remote keyboard, mouse, CD drive, or diskette drive appear as standard

 

 

USB devices.

 

 

The Remote Console application depends on the following requirements to run

 

 

correctly. Client systems require a web browser (at least IE6, Mozilla, or Firefox)

 

 

with Sun Java™ runtime environment (at least version 1.6 plug-ins) correctly

 

 

installed. Java is available for free download at http://java.sun.com.

4

Client-side Secure

You must install a Secure Shell communications application on the remote client

 

Shell application

system (server, workstation, or laptop) to access the Embedded LOM through a

 

 

remote Secure Shell (SSH).

Many Secure Shell communications applications are available from commercial or open-source distribution. Refer to http://www.openssh.org for information about open-source client-side SSH applications.

5Serial Redirection You can set the serial redirection to display system output or Embedded LOM output. A console can also be started to display system output. By default, the Embedded LOM output appears. The BIOS contains these serial redirection options.

Refer to the Sun Fire X4150 Server Product Notes and the Embedded Lights Out

Manager (ELOM) Administration Guide or the to the Sun Integrated Lights Out

Manager Users Guide for more information.

Chapter 3 Setting Up the Sun Fire X4150 Server

31

Image 41
Contents Sun Fire X4150 Server Installation Guide Please Recycle Contents Configuring the Preinstalled Solaris 10 Operating System Setting Up the Sun Fire X4150 ServerIf You Need Help Vi Sun Fire X4150 Server Installation Guide May How This Book Is Organized Table P-1Installation Guide ChaptersSun Online Typographic ConventionsRelated Documentation Safety and Compliance InformationSun Fire X4150 Server Documentation Sun Welcomes Your Comments Tools and Equipment Needed Installation Process Flowchart1Sun Fire X4150 Server Installation Process Part 2Sun Fire X4150 Server Installation Process Part Options Package Contents InventoryUnpacking the Boxes Antistatic Precautions Sun Fire X4150 Server Description Front Panel Features2Back Panel Legend Back PanelSun Fire X4150 Server Installation Guide May Server Installation Process Overview Before You Install the Server1Rack Compatibility Service LabelChecking Compatibility Disassembling Slide-Rails Preparing the Slide Rails and Server for InstallationUnpack the slide-rails 1Disassembling the Bolt-onSlide-rail Before Installation2Aligning the Mounting-bracket With the Server Chassis Installing the Mounting-Brackets Onto the ServerAttaching Bolt-On Slide-Rail Assemblies Attaching the Slide-Rail Assemblies to the RackSlide-rail assembly Rack post Rail-width spacer 5Extending the Anti-tip Foot Installing the Server Into the Slide-Rail AssembliesSun Fire X4150 Server Installation Guide May 7Cable Management Arm CMA Installing the Cable Management ArmLeft slide-rail CMA rail extension Remove tape to separate partsLeft slide-rail CMA rail extension Right slide-rail CMA mounting bracket Right slide- rail assembly CMA slide-rail connector 12Connecting the CMA Arm to the Rail Extension Connector Install and route cables to your server, as requiredCMA arm CMA cable hanger Verifying Operation of the Slide-rails and CMA Setting Up the Sun Fire X4150 Server Connector Locations Connecting the CablesCabling the Server 2Front Panel Power/OK LEDEmbedded LOM Service Processor Software Overview Service Processor OverviewRemote Console 2Embedded LOM Service Processor ComponentsApplication Client-side SecureIntegrated LOM Service Processor Software Overview Initial LOM Setup Overview Connecting to the LOM Service Processor for the First TimePower on the server or restart the server if it is running Determining the LOM Service Processor IP AddressMethod 1 Access the Bios See -4for the position of the serial port on the back panel Be sure to record the IP address assigned to the LOM Method 1 Using the Bios Modifying the Service Processor IP AddressExample Method 2 Using the Serial ConnectionIlom Set /SP/network IPSource=dhcp Applying Power for the First Time Install and configure the software, as required Installing the Intel Proset Teaming Utility Sun Fire X4150 Server Installation Guide May Delivery Methods Solaris Preinstall OverviewAbout the Grub Menu Before You Begin1Installation Worksheet Installation WorksheetNIS+ Start the LOM console. Elom Configuring the Solaris OSRedirect the Console Output to the Video Port Optional Using the Grub MenuReboot the server Configuring Sun Fire X4150 Server RAID DrivesRAID Drive Overview Ctrl-A3RAID Drive Options RAID Drive OptionsMirroring the Preinstalled Solaris OS with LSI RAID Using your Solaris Server, log in and start Xserver Solaris 10 Operating System User Information Accessing Solaris 10 User DocumentationSolaris 10 OS Training Downloading Solaris 10 OS SoftwareWindows Server 2003 R2 Preinstall Overview How to start a Rkvm Session Configuring the Windows Server 2003 R2 Operating SystemDetermine the Service Processor IP address Boot the pre-installation image for the first timeDate and Time Settings screen appears Workgroup or Computer Domain page appears 2RAID Drive Options 2shows the RAID drive optionsSun Fire X4150 Server Installation Guide May You will need the Sun Fire X4150 Server Tools and Drivers CD One more confirmation screen appears. Confirm the mirroring Power On the Main Power Powering On and Off the Server1Front Panel Power/OK LED Power Off from Main Power Mode2Troubleshooting Procedures Setup Troubleshooting3System Information Needed for Support Contacting Support4Sun Technical Support Contacts 4Sun Technical Support Contacts Index Sun Fire X4150 Server Installation Guide May
Related manuals
Manual 12 pages 7.65 Kb Manual 150 pages 45 Kb