Paradyne SMD2000-24T Default Settings, Shdsl Parameter Defaults, T1 Uplink Parameter Defaults

Default Settings

SHDSL Parameter Defaults

Table 1. SHDSL Defaults

Parameter	Default
Backbone-VLAN	0	(off)
Circuit Identification	n/a (no default)
Flood	Uplink
IP Range 1	0.0.0.0 – 255.255.255.255
IP Range 2	0.0.0.0 – 0.0.0.0
Protocol	All
Speed	272 kbps
VLAN Priority	0	(none)
VLAN Range	0	- 0 (off)

T1 Uplink Parameter Defaults

Table 2. T1 Defaults

Parameter	Default
Frame Type	Extended Super Frame (ESF)
Line Attenuation	0 dB
Line Code	Bipolar with 8 Zero Substitution (B8ZS)
Speed*	n/a (T1 uplink speed is determined via communication with the
	remote T1 provider equipment to which the SMD2000-24T is
	connected)
Timing*	Loop

*Speed and timing are non-configurable parameters for the SMD2000-24T T1 uplink ports.

15