Unpacking and Inspecting the Equipment
!
HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from damage due to electrostatic discharge (ESD) during normal operation. When performing installation procedures, however, take proper static control precautions to
prevent damage to equipment. If you are not sure of the proper static control precautions, contact your nearest sales or service representative.
The following components should be included in your package:
1 –
4 – Rubber Pads
2 – Rack Mount Brackets
10 – #6 Phillips Bracket Screws
4 – #10 Phillips Rack Screws
4 – #12 Phillips Rack Screws
1 – DB9 Socket to RJ45 Plug Adapter
If there is visible damage, do not attempt to connect the device. Contact your sales representative.
Site Selection Criteria
In choosing a location for the installation of this product:
Select a restricted access area where admittance is limited to trained and authorized service personnel.
Ensure that the internal temperature of a rack containing this equipment will not exceed the maximum recommended ambient temperature of 149° F (65° C).
Place the chassis such that connecting cables will not become a tripping hazard or pull loose from the chassis.
Do not block power supply vents or otherwise restrict airflow when installing this equipment.
Ensure that installation of this equipment in a rack will not cause the rack to become
Do not overload the electrical branch circuit of the power source for this equipment.
For tabletop use, attach the enclosed rubber feet to the bottom of the chassis.
For rack installation, attach the enclosed rack mount brackets to the sides of the chassis with the screws provided.
4