Paradyne SMD2000-24T LEDs 3 State Indication Additional Information, Shdsl

Table 9. LEDs (3 of 3)

	State	Indication	Additional Information
AL: T1	No	T1 uplink connection is	An established T1 uplink
Alarm	illumination	operational	connection has no alarm
Port 1			indications and is
and 2			operational UNLESS the T1
			LK LED remains unlit as
			well, in which case the T1
			uplink connection is in Red
			Alarm.
	Solid	Yellow Alarm: The T1	The remote T1 provider
	amber	uplink's outgoing connection	equipment has lost its
		has been lost; no data is	incoming connection and is
		being transmitted.	in Red Alarm.
	Pulsing	Blue Alarm: An indirect	The remote T1 provider
	amber	connection has been lost;	equipment has lost a
		the T1 uplink port may no	connection with an
		longer be receiving data	intermediate device and is in
		from the remote T1 provider	Red or Yellow Alarm.
		equipment.
SHDSL	Flashing	SHDSL connection is	The port has received valid
LK: Ports	green	established and active	data from the remote
1-24			SHDSL modem within the
			last second.
	Solid green	Problematic SHDSL	A connection exists but there
		connection	is indication of a problem
			with the SHDSL line.
	No	No SHDSL connection
	illumination
SHDSL	Flashing	SHDSL connection is	Traffic is flowing.
ACT:	amber	established and active
Ports
	Solid	Heavy traffic	The port is receiving
1-24
	amber		unusually large amounts of
			data from, and/or
			transmitting unusually large
			amounts of data to, the
			remote SHDSL modem.
	No	No activity	A link may exist but no data
	illumination		is being transmitted to the
			remote SHDSL modem.

22