Paradyne 9126-II, CSU, DSU, 9128-II manual Device Messages 4 What It Indicates What To Do

7. Operation and Maintenance

Table 7-6. Device Messages (4 of 6)

Message	What It Indicates	What To Do
No DLCIs Available for	New was selected from the	Configure more network and/or
Mgmt PVC	Management PVCs option	Port-1 DLCIs and try again.
	screen, but all configured
	DLCIs have been
	connected.
No DLCIs Defined	DLCI Records was selected	Select New and create a DLCI
	from an interface’s	record.
	Configuration Edit/Display
	menu, and no DLCI
	Records have been created
	for this interface.
No more DLCIs	New or CopyFrom was	Delete a DLCI, then create the
allowed	selected from an interface’s	new DLCI Record.
	DLCI Records configuration
	screen, and the maximum
	number of DLCI Records
	had already been reached.
No Primary	New or Modify was selected	Configure additional DLCIs for the
Destination Link DLCIs	from the PVC Connection	network link and try again.
Available	Table, but even though	If a network DLCI has been
	DLCIs are available to form
		entered as a Source DLCI:
	a connection, no DLCIs are
	available on the network	1.	Change the Source DLCI to a
	link, which is a suitable		user data port DLCI.
	Primary PVC Destination.	2.	Enter the network DLCI as the
			PVC’s Primary Destination.
No Security Records	Delete was selected from		No action needed.
to Delete	the Administer Login		Enter a security record.
	screen, and no security
	records had been defined.
Password Matching	Password entered in the	T	Try again.
Error – Re-enter	Re-enter Password field of		Contact your system
Password	the Administer Logins
			administrator to verify your
	screen does not match what
			password.
	was entered in the
	Password field.
Permission Denied	A file transfer was
(Seen at an FTP	attempted, but the:
terminal.)	User did not have Level		See your system administrator
	1 security.		to get your security level
			changed.
	Wrong file was specified		Try again, entering the correct
	when the put command	T	file with the put command.
	Twas entered.
	User attempted to		Enter the put command
	upload a program file		instead of a get command; you
	from the unit.		can only transfer files to the
			unit, not from it.
			See Upgrading System
			Software on page 7-77.

9128-A2-GB20-80 September 2002 7-15