Paradyne 7924 Unframed Operation, Time Slot DS0 Assignments, Payload Rate DSX-1 T1 DS0s Used

Page 45

Worksheets

Unframed Operation

Some units do not support unframed operation. To determine whether or not your DSX-1-compatible unit supports unframed operation when connected to a

V.35-compatible unit, all three of the following conditions must be true:

1.The DSX-1-compatible unit must have a firmware revision number of seven (07) or higher.

If you have a DSX-1-compatible standalone unit, display the HDSL FW (firmware) revision number by selecting the Board Configuration option (3) from the Main Menu (a system terminal is required).

If you have a DSX-1-compatible nest-mountedunit, refer to the HotWire

Models 7924 and 7925 T1 and E1 HDSL Nest Card Termination Units User's

Guide.

2.The V.35-compatible unit must have an HDSL firmware revision number of three (03) or higher.

To display the HDSL FW (firmware) revision number, select the Board Configuration option (3) from the Main Menu (a system terminal is required).

3.The V.35-compatible unit must have a hardware revision number of five (05) or higher.

To determine the hardware revision number, look at the label on the bottom of the standalone unit that has the ªCEº and ªCSAº logos. The second row of numbers on this label should be ª900P005705º or higher. The last two digits of this number (05) indicate the hardware revision number.

Time Slot (DS0) Assignments

When the V.35 payload rate is set for less than 1536 kbps, that payload rate determines which T1 DS0s are used, as follows:

V.35 Payload Rate

DSX-1 T1 DS0s Used

 

 

 

 

1

(64 kbps)

1

 

 

 

 

2

(128 kbps)

1, 2

 

 

 

 

3

(192 kbps)

1

± 3

 

 

 

 

4

(256 kbps)

1

± 4

 

 

 

 

5

(384 kbps)

1

± 6

 

 

 

 

6

(512 kbps)

1

± 8

 

 

 

 

7

(768 kbps)

1

± 12

 

 

 

 

8

(1024 kbps)

1

± 16

 

 

 

 

A-4

October 1997

7924-A2-GB20-30

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Model 7924 Standalone T1 Hdsl Termination Unit Warranty, Sales, and Service Information Copyright  1997 Paradyne Corporation All rights reservedTrademarks Important Safety Instructions EMI Warnings Contents Customizing V.35-Compatible Units Iii Cable Pin AssignmentsAbout This Guide Document Purpose and Intended AudienceDocument Summary Document Number Document Title Product-Related DocumentsHotWire 7924-A1 Models and Features About HotWire Model Termination UnitsModel Number Features Campus Network Applications Typical ConfigurationsDCS User Interface Types Cellular Network AccessInstalling the Unit Package Checklist for HotWire Model 7924-A1Overview Connecting Power to the Unit Connecting to the NetworkProcedure DSX-1-Compatible HotWire 7924 ± Rear PanelUsing Terminal and Switchpack Modes Choosing an Interface ModeConnecting to a System Terminal Switching Between Terminal and Switchpack Modes Customizing DSX-1-Compatible Units Accessing Configuration OptionsMaking Changes from the Terminal Interface Hdsl Card Type DSX-1-Compatible Units Configuration Options 1DSX-1-Compatible Units Configuration Options 2 Displaying Switchpack Definitions Making Changes in Switchpack ModeDisplaying Line Build-Out Definitions Switchpack Settings for Line Build OUTCustomizing V.35-Compatible Units Customizing V.35-Compatible Units ± 6 x 64 384 kbps ± No change to rate V.35-Compatible Units Configuration OptionsMaking Changes in Switchpack Mode CO/CP OFF=CP, ON=CO What to Monitor Monitoring the UnitBoard Status Board Status for DSX-1-Compatible UnitBoard Status for V.35-Compatible Unit Performance Statistics Performance Statistics for V.35-Compatible Unit Performance Statistics for DSX-1-Compatible UnitRemote Unit Information Front Panel LEDs DSX-1-Compatible UnitMeaning Compatible Unit Testing Detecting a ProblemUnderstanding Loopback Tests Local Loopback, Initiated at the CO Unit Local LoopbacksRemote Loopback, Initiated at the CO Unit Remote LoopbacksStarting and Stopping Loopbacks Resetting the Unit Worksheets DSX-1-to-DSX-1 Configuration LAN DSX-1-to-V.35 ConfigurationUnframed Operation Time Slot DS0 AssignmentsPayload Rate DSX-1 T1 DS0s Used Compatible Units Configuration Worksheet DSX-1-Compatible Units Configuration WorksheetTerminal Connection Cable Pin Assignments Cable Pin AssignmentsPin Hdsl Loop Connection Cable Pin AssignmentsT1 Network Connection Cable Pin Assignments Connection Cable Pin Assignments Direction Code Pin NameFunction Description Switchpacks and Jumpers Jumper Pins Factory-SettingDSX-1-Compatible Units Switchpacks and Jumpers Compatible Units Jumper P8 Glossary Factory defaultsGL-1 COM portReset GL-2Loopback IN-1 IndexIndex IN-2
Top Page Image Contents