Paradyne 7924 manual About This Guide, Document Purpose and Intended Audience, Document Summary

About This Guide

Document Purpose and Intended Audience

This guide contains information needed to set up, configure, and operate HotWire Model 7924-A1 T1 HDSL termination units. It is designed for central office technicians or network engineers who have an understanding of the deployment of digital subscriber line systems in a telephone company or private network environment.

HotWire 7924 may be ordered either as a standalone unit (7924-A1-xxx) or as a nest-mounted card (7924-B1-xxx) that fits in a HotWire 7900 nest. This guide describes the installation and maintenance procedures for the standalone version, Model 7924-A1-xxx.

Document Summary

Section	Description
Chapter 1	About HotWire Model 7924 Termination Units. Describes the
	features of each version of the Model 7924, and typical
	configurations.
Chapter 2	Installing the Unit. Describes how to install the unit and
	make connections.
Chapter 3	Using Terminal and Switchpack Modes. Provides
	instructions for connecting a VT100-compatible terminal
	user interface. Also describes how to make manual
	configuration changes directly on the board hardware.
Chapter 4	Customizing DSX-1-Compatible Units. Provides instructions
	for modifying configuration options by using the terminal
	interface or DIP switches and jumpers on the board.
Chapter 5	Customizing V.35-Compatible Units. Provides instructions
	for modifying configuration options by using the terminal
	interface or DIP switches and jumpers on the board.

7924-A2-GB20-30 October 1997 v