Paradyne 7510 DSU Viewing System and Test Status, Main Menu → Status → System and Test Status

Monitoring the DSU

Viewing System and Test Status

To view System and Test Status information, follow this menu selection sequence:

Main Menu → Status → System and Test Status

The System and Test Status screen has three sections:

HHealth and Status ± Displays messages in priority order (highest to lowest). Refer to Table 4-2,Health and Status Messages.

HSelf-Test Results ± Results of the Diagnostic test run on the device itself. Refer to Table 4-3,Self-Test Results Messages.

HTest Status ± Currently active tests. Refer to Table 4-4,Test Status Messages.

main/status/system
Device Name: Node A		Model: 7510
	SYSTEM AND TEST STATUS
HEALTH AND STATUS	SELF-TEST RESULTS	TEST STATUS
Cross Pair Detection	Device Fail	No Test Active
No Signal hhh:mm:ss	Memory Fail	CSU Loopback Active
Out of Service hhh:mm:ss	Passed	Network-init. CSU LB Active
Out of Frame hhh:mm:ss		DSU Loopback Active
Excessive BPVs hhh:mm:ss		Network-init. DSU LB Active
User Data Port DTR Off		V.54-initiated DSU LB Active
Device Fail yyyyyyyy		Local Loopback Active
DSU Operational		Sending 511 on Port
		Monitoring 511 on Port
		Sending 511 on Network
		Monitoring 511 on Network
		Lamp Test Active

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

	ESC for previous menu	MainMenu Exit
Refresh	Clear

4-2 November 1997 7510-A2-GB20-10