Paradyne 7510 DSU manual Device Messages 2 What Message Indicates What To Do

Messages and Troubleshooting

Table 6-1. Device Messages (2 of 2)

Device Message	What Message Indicates	What To Do
Invalid Test	A loopback or 511 pattern	H Wait until other test ends and
Combination	test was in progress when	message clears.
	Start was selected to start	H Abort all tests from the Test
	another test, or was active
		menu screen.
	on the same or another
	interface when Start was	H Stop the test from the same
	selected.	screen the test was started
		from.
Please Wait	Command takes longer	Wait until message clears.
	than 5 seconds.
Test Active	A test is running and no	H Contact service provider if test
	higher priority health and	initiated by the network.
	status messages exist.	H Wait until the other test ends
		and message clears.
		H Cancel all tests from the Test
		screen.
		H Stop the test from the same
		screen the test was started
		from.

6-2 November 1997 7510-A2-GB20-10