Paradyne manual Table D-1. Model 7510 DSU Technical Specifications 1

Page 62

Technical Specifications

D

Table D-1. Model 7510 DSU Technical Specifications (1 of 2)

Item	Specifications

Housing
Height (including feet)	2.1 inches	(5.3 cm)
Height (without feet)	2.0 inches	(5.1 cm)
Width	8.7 inches	(22.1 cm)
Depth (case)	6.2 inches	(15.7 cm)
Depth (case and connectors)	6.5 inches	(16.5 mm)

Weight	1.3 pounds (0.6 kg)

Power
Normal service voltage	Input: 120 Vac +12 Vac, 60 Hz +3 Hz
range	4.9 watts (max.) at 120 Vac

Approvals
FCC Part 15	Class A digital device
FCC Part 68	Refer to the equipment's label for Registration Number.
Safety Certifications	Refer to the equipment's label for approvals on product.
Emissions	Class A digital apparatus

Interface and Connectors
25-pin D-subminiature	EIA-232/ ITU V.24 (ISO 2110) for Terminal Port
connector
34-pin MS34 connector	ITU V.35 (ISO 2593) for DTE Port

Physical Environment
Operating Temperature	32° to 122° F (0° to 50° C)
Storage Temperature	±4° to 158° F (±20° to 70° C)
Relative Humidity	5%Ð95% (noncondensing)
Shock and Vibration	Withstands normal shipping and handling

Heat Dissipation	11.6 Btu/hr. (max.) at 120 Vac

7510-A2-GB20-10

November 1997

D-1

Image 62

Contents Model 7510 DSU Copyright 1997 Paradyne Corporation All rights reserved Contents Monitoring the DSU Configuration Option Tables IndexDocument Summary About This GuideDocument Purpose and Intended Audience Product-Related Documents Model 7510 DSU Startup InstructionsModel 7510 DSU Features About the DSURouter Relay Network Typical DSU ConfigurationsFrame Modem User InterfacesRear Panel Interfaces TerminalUsing the Asynchronous Terminal Interface Connecting to the Terminal PortMain Menu Initiating an ATI SessionSelect What Affects Screen Displays Status Test Configuration Control Load FromScreen Format Types Use the screen formatScreen Work Areas Menu PathPress Navigating the ScreensKeyboard Keys Screen Function Keys For the screen Select Press Return to FunctionSwitching to the Screen Function Key Area ExampleEnding an ATI Session Main Menu → Control → Device Name Customizing the DSUIdentifying the Device and System Device NameSaving Configuration Options If you select ThenAccessing and Displaying Configuration Options Configuring the DSUConfiguration Option Areas Configuration Option Area Configuration Option SetMonitoring the DSU What to MonitorSystem and Test Status Health and Status SELF-TEST Results Viewing System and Test StatusMain Menu → Status → System and Test Status Health and Status HhhmmssSelf-Test Results Self-Test Results Messages What Message Indicates What To DoTest Status Messages Test Status Messages MeaningViewing Network Interface Status Main Menu → Status → Network Interface StatusViewing Network Performance Statistics Network Performance StatisticsMain Menu → Status → Display LEDs Alarm Test DM OOS OOF NS TXD RXD RTS CTS DTRMonitoring the LEDs Display Leds System NetworkAlarm System LEDsNS ± No Signal DM ± Data ModeOOS ± Out of Service Network LEDsPort LEDs Main Menu → Test TestingAccessing the Test Menu TestDevice Messages Loopback Type Initiated By Table A- 2, Network Interface OptionsNetwork Tests Running Network TestsMain Menu → Test → Network Tests CSU or External Network Loopback DSU or Internal Network Loopback Send V.54 Up/Down SequencesTest Pattern for the Network Data Port Tests Running Data Port TestsMain Menu → Test → Data Port Tests Local Loopback Test Pattern for the DTERunning the Lamp Test Main Menu → Test → Lamp TestEnding an Active Test Responding to Device Messages Messages and TroubleshootingMessages and Troubleshooting Device Messages 1 What Message Indicates What To DoDevice Messages 2 What Message Indicates What To Do Troubleshooting Troubleshooting 1 Symptom Possible Cause SolutionsMain Menu → Control → Reset Device Resetting the DSUTroubleshooting 2 Symptom Possible Cause Solutions Displaying DSU Identity InformationOverview Configuration Option TablesSelect To Access To Configure Status Load Edit/Display TestSystem Options Menu Operating ModeLads Timing Possible Settings Internal, External, Receive Table A-1. System Options 1Lads Line Rate Kbps Test TimeoutTable A-1. System Options 2 Test Duration minNetwork-initiated DSU Loopback 64K CC Network Interface Options MenuTable A-2. Network Interface Options Data Scrambling 64K CCInvert Transmit Clock Data Port Options MenuTable A-3. Data Port Options 1 Bilateral LoopbackRlsd Control Table A-3. Data Port Options 2Carrier Control by RTS Table A-3. Data Port Options 3 Inactivity TimeoutTerminal Port Options Table A-4. Terminal Port Options 1Table A-4. Terminal Port Options 2 Disconnect TimeminutesWorksheets Configuration WorksheetsConfiguration Option Settings Network Interface Cables and Pin Assignments Terminal Port EIA-232 Connector Signal Direction Pin #Number Direction Pin Socket Connector User Data Port ConnectorSignal Standard EIA-232-D Crossover Cable PinRJ48S DDS Network Interface Cable Functions Circuit Pin # LAN Adapter Converter and CableModular RJ48S DDS Network Interface Cable Cable Plug to Modular Jack LAN AdapterTechnical Specifications Table D-1. Model 7510 DSU Technical Specifications 1Network Compatibility Table D-1. Model 7510 DSU Technical Specifications 2Network Interface DTE Data Port InterfaceGlossary Excessive BPV Factory defaultsEIA-232 Frame relayNode ResetMultiplexing Non-latchingIndex NumbersIN-2 IN-3