Paradyne 2600 IP DSLAM manual Management Port

2. Cabling

Management Port

Port 1 can be used to connect the BitStorm 2600 to a network management system using a 10BaseT or 100BaseT LAN. A straight-through cable can be used regardless of the destination interface, since the port automatically distinguishes between an MDI and an MDIX.

Procedure

To use Port 1 as the out-of-band management port:

1.Connect an 8-position modular cable to Port 1.

2.If the BitStorm 2600 is in a rack, fasten the cable to a rail with a cable tie.

3.Connect the other end of the cable to your Ethernet hub or to a network interface card in a PC.

Hub Device

PORT1-
10/100BT	PORT2-
	10/100BT	1000BT
		PORT3
		K	T
		IN
			C
		L	A
	CONSOLE	ALARM

Port 1

GigE
S	M
U
T	R	T
TA
S	LA	TE
	A

1	3	5	7
2	4			9	11
		6	8			13	15
				10	12			17	19
						14	16			21	23
								18	20	22	24

DSL PORTS 1-24

03-17446

2-6 January 2004 2600-A2-GN20-10