Paradyne 2600 IP DSLAM manual Ground

2. Cabling

Ground

Procedure

To connect the unit to a ground:

1.Crimp a ring terminal onto the stripped end of 14 AWG or heavier copper ground wire.

2. Remove the screw marked by the ground symbol (	) at the right side of the
front panel.

3.Fasten the ring terminal to the front panel using the same screw.

4.Attach the ground wire to an earth ground.

POTS 1-24

2600

To Earth Ground

03-174

2-10 January 2004 2600-A2-GN20-10