3. Using the Web Interface
Advanced
The CPE supports a host of advanced features. For basic router functionality, you do not need to utilize these advanced features. The features help with routing, security, port configuration, and plug and play capability.
UPnP
UPnP NAT and Firewall Traversal allow traffic to pass through the router for applications using the UPnP protocol. This feature requires one active DSL connection. In the presence of multiple DSL connections, select the one over which the incoming traffic will be present, such as the default Internet connection.
To enable UPnP you must first have a WAN connection configured. Once a WAN connection is configured:
Procedure
1.From the Home screen, click on Advanced and under Advanced, select UPnP. The UPnP screen appears.
2.Enable UPnP and then select which connection will utilize UPnP.
3.The Apply button will temporarily save these settings. To make the change permanent, click on Tools and select System Commands. On the System Commands page, click on Save All.
Figure 3-17. UPnP
April 2005 |
|