3. Using the Web Interface
Firewall/NAT Services
To enable or disable Firewall and NAT:
Procedure
1.From the Home screen, click Setup.
2.Under LAN Setup, select Firewall/NAT Services. By unselecting the Enable Firewall and NAT Services button the firewall and NAT services is disabled for all WAN connections. Enabling Firewall NAT does not automatically apply it to connections.
The Apply button will temporarily save this setting. To make the change permanent, click on Tools (at the top of the page) and select System Commands. At the System Commands page, click on Save All.
Figure 3-16. Firewall/NAT Services
April 2005 |