3. Using the Web Interface
Modem Setup
To configure the DSL modulation type:
Procedure
1.From the Home screen, click on Setup.
2.Under WAN Setup, select Modem Setup. This will bring up the Modem Setup screen. Leave the default value if your ISP did not provide this information. For most cases, this screen should not be modified.
Figure 3-13. Modem Setup
The Apply button will temporarily save these settings. To make the change permanent, click on Tools (at the top of the page) and select System Commands. At the System Commands page, click on Save All.
TSML
Troubleshooting Management Link (TSML) is a feature that lets authorized Network Operations Center (NOC) personnel troubleshoot and manage the router from the NOC.
The TSML connection (VPI 0, VCI 34) examines incoming packets, looking for ICMP Echo Requests. If the TSML connection receives five ICMP Echo Request packets with the same destination IP address within five seconds, it adopts the destination IP address. The address can then be used to access the router. No authentication is required over the link.
The TSML connection is automatically configured. The TSML Connection screen shows the settings, but they cannot be altered and saved.
January 2005 |