Paradyne 6381-A3 manual Modify an Existing Connection, Clip Connection Setup

3. Using the Web Interface

Figure 3-12. CLIP Connection Setup

To complete the connection you must now click the Apply button. The Apply button will temporarily save this connection. To make the change permanent, click on Tools (at the top of the page) and select System Commands. At the System Commands page, click on Save All.

Modify an Existing Connection

To modify an existing connection:

Procedure

1.From the Home screen, click on Setup.

2.Click on the connection you want to modify. The connections are listed by name.

If you delete a connection, to make the change permanent, click on Tools (at the top of the page) and select System Commands. At the System Commands page, click on Save All.

3-16 January 2005 6381-A2-GB23-10