Paradyne 6381-A3 manual IP Filters

3. Using the Web Interface

IP Filters

Use the IP Filters screen to block all or selected traffic. To set up IP Filters:

Procedure

1.From the Home screen, click on Advanced and under Advanced, select IP Filters. The IP Filters screen appears.

2.Select the LAN Group from the drop-down list that these changes will apply to.

3.Select a LAN IP address from the LAN IP drop-down list. Click on New IP to add a new IP address to the list.

4.Select available rules from the list, or click on Custom IP Filters to create a new rule.

5.Click on Apply. The Apply button will temporarily save these settings. To make the change permanent, click on Tools and select System Commands. On the System Commands page, click on Save All.

Figure 3-23. IP Filters

6381-A2-GB23-10 January 2005 3-27