3. Using the Web Interface
Multicast
This option enables the IGMP proxy, which allows NAT clients to participate in
IGMP multicast groups. It should only be enabled if NAT is also enabled.
To enable Multicasting:
Procedure
1.From the Home screen, click on Advanced.
2.Under Advanced, select Muliticast.
3.Click in the check box to enable Multicast. Then select one or more available connections.
The Apply button will temporarily save these settings. To make the change permanent, click on Tools and select System Commands. On the System Commands page, click on Save All.
Figure 3-27. Multicast
January 2005 |