Patton electronic 3196RC user manual Examples for configuring static connections, Solution

Page 49

Model 3196RC T-DAC User Manual	3 • Configuring the T-DAC for operation

The following notation should be used for assigning timeslots:

•dash: (-), e.g., 1-3

•comma: (,), e.g., 1,4,9

•combo: 1-2,3,6-7

Examples for configuring static connections.

Three examples are provided:

•Example 1: Connecting an iDSL modem port to an E1 WAN port.

•Example 2: Connecting an E1 WAN port to another E1 WAN port.

•Example 3: Connect an iDSL modems port to another iDSL modem port.

Example 1

Connect iDSL modem, Port 3 (referring to modem #3), time slots 1 - 3, to an E1 line on (WAN) Port 1, time slots 1 - 3.

Solution:

1.Under Dev Type A, select iDSL(3).

2.Under Dev Num A, select port3(3).

3.Under Dev Slots A, enter 1 - 3.

4.Under Dev Type B, select t1-e1(1).

5.Under Dev Num B, select port1(1).

6.Under Dev Slots B, enter 1 - 3.

7.Click the Submit Query button.

Note At this point the DS0 channel mapping is completed. Now is time to configure the DTE data rate of the iDSL modem, refer to section “Activating the iDSL ports” on page 54.

Using a browser to complete Model 3196RC configuration

49

Image 49

Contents IDSL TDM-Digital Access Concentrator T-DAC Mailsupport@patton.com Summary Table of Contents Table of Contents Operation and shutdown Network Ports RJ-21X connector pin-out List of Figures Page List of Tables Radio and TV Interference Compliance InformationFCC Part 68 Acta Statement Industry Canada NoticeCE Notice Audience About this guideStructure Typographical conventions used in this document PrecautionsGeneral conventions Garamond bold type Mouse conventionsIntroduction Chapter contentsModel 3196RC T-DAC Model 3196RC iDSL T-DAC overviewWAN Hardware overviewRS-232 control port Power systemCentral processing unit IDSL portsPhysical dimensions TemperatureManagement services System timingLED display Ethernet LED CLK Source LED CLK Error LEDDSL Approvals Hardware installation Introduction DAC blades installationUnpacking the Model 3196RC T-DAC Alignment/ESD pin and card handle Connecting the Ethernet ports Cable installationDB-9-to-RJ-45 cable diagram WAN cable‘s 68-pin Scsi connector Connecting to the T1/E1 WAN portsNot Used RJ-21X connector Connecting the iDSL ports2.2 Vpp Connecting the Bits clockEXT Clock connector location Completing the hardware installation Configuring the T-DAC for Operation Configuration prerequisites Connecting the DB9-RJ45 adapter with the included cable Initial configuration through the RS-232 control portConnection Description window Setting up the HyperTerminal or similar program sessionConfigure your COM port settings as shown in , then click OK Login window Displaying the T-DAC 3196RC web administration pages Using a browser to complete Model 3196RC configurationHome page overview RC Configuration Menu homeHome page window panes Flash Configuring the default gatewayIP Routing Information window Configuring the system clocking parametersExample For Clock Reference select slave3 Configuring the DS0 mappingDacs Display Type drop-down menu , select displayLongForm0 Solution Examples for configuring static connectionsIDSL Port Configuration IDSL Port 1 Details Click the iDSL hyperlink on the 3196RC Configuration Menu Click on Submit Query Activating the iDSL ports IDSL Port Configuration windowConfiguring the T-DAC for operation Configuring the T-DAC for operation Accessing the Line Interface Settings Configuring line settings and signaling for E1T1/E1 Link Activity Ports 1 4 Configuring the E1 line interface settingsFrom the Line Build Out pull-down menu select e1pulse1 Configuring line settings and signaling for T1 Line Type pull-down menu with dsx1ESF2 selected Configuring the T1 line settingsFrom the Line Build Out pull-down menu select t1pulse0dB1 Backing up your configuration parameters Saving your configurationIMPORT/EXPORT Backing up the configuration store in flash memory Completing the installation Configuring the T-DAC for operation Operation and shutdown De-activating the Model 3196RC Activating the Model 3196RCRemote loop Troubleshooting and maintenanceCited in section De-activating the Model 3196RC on Power Fault analysisSystem IDSL port test modes Basic iDSL and T1/E1 test modesLocal loop Local loopback Remote loopLine Loopback Line LoopDSX1 payload loop dsx1PayloadLoop T1/E1 port test modesDSX1 line loop dsxLineLoop Periodic maintenanceCalibration Exporting the current Model 3196RC configuration MaintenanceReplacing the Model 3196RC IMPORT/EXPORT Troubleshooting and maintenance Removing the defective Model 3196RC Importing a saved configuration Installing the replacement Model 3196RCCompleting the installation Contacting Patton for assistance Out-of-warranty service Warranty coverageContact information Returns for creditRMA numbers Return for credit policyShipping instructions Appendix a Network Ports RJ-21X connector pin-out DSL Port Pin Positions Wire Color Code Port Appendix B WAN Network Module Connector pinout Pin Telco pinout Port Pairs 68 Pin Wire Color Direction Positions CodePort 13/RX Pink/Violet Violet/Pink Port 14/TX