Patton electronic SL4020 manual Installing the router, Do the following

Page 23

SmartLink 4020 Getting Started Guide	2 • SmartLink installation

Installing the router

Do the following:

Power adapter

	Internet Service
	Provider
	PC or	--or--	LAN	Phone
	LAN		Hub/Switch
6	5	4		3

Power

www.patton.com

10/100 Ethernet

Phone

12V, 1A

WAN

LAN

1

2

Power jack

Reset button

WAN port

LAN port

Phone jack 1

Phone jack 2

Figure 2. SmartLink 4020 installation diagram

1Place the unit on a desktop or similar sturdy, ﬂat surface that offers easy access to the cables. The unit should be installed in a dry environment with sufﬁcient space to allow air circulation for cooling.

Note For proper ventilation, leave at least 2 inches (5 cm) of clearance at the sides, front, and rear of the unit.

2Set your LAN Local Area Connection Properties for Internet Protocol (TCP/IP) to Obtain an IP address automatically and to Obtain DNS server address automatically.

WARNING

CAUTION

Do not work on the system or connect or disconnect cables during periods of lightning activity.

The Interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to volt- age, current, anticipated temperature, ﬂammability, and mechani- cal serviceability

3Plug in the telephone or telephones (see ﬁgure 2).

4Plug in the PC or LAN, or a LAN hub/switch.

Installing the router

23

Image 23

Contents SL4020 Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony Codecs System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables Structure About this guideAudience Safety when working with electricity PrecautionsGeneral conventions Typographical conventions used in this documentGeneral observations SmartLink 4020 Getting Started GuideAbout this guide General information Chapter contentsSmartLink SmartLink 4020 overviewSmartLink installation Do the following Installing the routerConnect to the Internet service provider Connecting the SmartLink to the network System information System Uptime HomeSystem information System Status Network-WAN Network-WAN Interface Status Network SettingsStatus Settings Specify ﬁxed WAN conﬁguration Device Operating ModeInternet Conﬁguration Obtain WAN conﬁguration dynamicallyWAN PPPoE Conﬁguration Enable PPPoEAuthentication SettingsInternet Vlan Conﬁguration MAC Spooﬁng ConﬁgurationMTU Size Assured Bandwidth for Voice QoS Quality of ServiceEnable Voice QoS Saving your workTOS/DiffServ window ToS/DiffServIPSec Conﬁguration Outbound ESP Authentication Key HEX Outbound AH Authentication AlgorithmOutbound AH Authentication Key HEX Outbound ESP Authentication AlgorithmInbound ESP Authentication Key HEX Network-LAN Dhcp Viewing the Dchp Client Table Server SettingsClient Network Information Static Address AssignmentViewing the Routing Table RoutingDynamic Routing Static RoutingDe-Militarized Zone Port ForwardingReserved Ports Port Forwarding to LANFilter IP Range Service AccessIP Filtering Ping Reply Telephony Telephony Line 2 Speed Dial Settings Speed Dial Serv Phone Line Status VoIP StatusVoIP Server Registration Status SIP Conﬁguration SIP Server SettingsGateway Settings RTP Telephone Event Conﬁguration SIP ExtensionsHook Flash Mime Type SIP Timer Values secVoIP Vlan Conﬁguration SIP ParametersNAT Traversal Jitter Buffer Audio/CODEC ConﬁgurationPacketization User Name Phone 1 & PhoneUser Information Phone NumberSupplementary Service Settings Speed Dial Serv Call Transfer ServIP Dialing Serv MWI ServDial Out Type Call Forward SettingsIncoming Call Block Selective Call Forward SettingsDistinctive Ring Settings Http Digest SettingSpeed Dial 1-8 Phone Number/IP Dialing Line 1 Speed Dial SettingsSpeed Dial Line 2 Speed Dial Settings System System System Conﬁrm new password Set Security PasswordNew Root Password New User PasswordLogging ConﬁgurationEnable Auto Upgrade Manual UpgradeAuto Upgrade Localization Auto Upgrade ProtocolUpgrade Server Auto Upgrade URLDistinctive Ring Setting Supplementary Service Keys IP Dialing Act Keys Dist Ring Act KeysWarm Line Act Keys DND Act KeysControl Timer Values Miscellaneous Ring SettingSnmp Trap Conﬁguration Snmp ConﬁgurationFXS Port Polarity Conﬁguration Snmp System Conﬁguration Snmp Community ConﬁgurationReload Documentation Documentation link IntroductionLogout Logout window Contacting Patton for assistance Patton support headquarters in the USA Warranty coverageContact information RMA numbers Out-of-warranty serviceReturns for credit Return for credit policyAppendix a Compliance information CE-Mark Warning ComplianceFCC Warning Radio and TV Interference Appendix B Speciﬁcations Fax and Modem Support Voice Processing signalling dependentVoice Connectivity ConnectivityOperating Environment Voice Services/FeaturesIP Services ManagementAppendix C Dial plans Complex Dial Plan Sample Dial PlansSimple Dial Plan Non-dialed Line Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF Appendix E Ring Cadence Conﬁguration Following is a sample ring cadence patter conﬁguration