Patton electronic SL4020 manual SIP Conﬁguration, SIP Server Settings, Gateway Settings

Page 52

SmartLink 4020 Getting Started Guide6 • Telephony

Note After conﬁguring the sections, click the Save SIP Settings button (see ﬁgure 28 on page 55) to save the new conﬁguration.

SIP Conﬁguration

Figure 23. SIP Conﬁguration section of the SIP window

SIP Server Settings

The SmartLink 4020 will automatically attempt to locate the VoIP server by using the domain name speciﬁed in the WAN interface or the server will be discovered via DHCP on the WAN interface. When found, the dis- covered server will be listed as the Current Server.

Enter the following information:

•Server address—The IP address or domain name hosting the VoIP SIP server

•Port—The UDP port of the VoIP SIP server. The default is 5060.

•Domain name—The VoIP domain name (realm) is used for validation of each phone’s username

•Expiration time unit (if you choose to send registration request with an expiration time)

•Unregistration—If checked, the SmartLink will send a SIP unregistered at system reload before sending a SIP registration request.

Gateway Settings

Dial Plan. Refer to appendix C, Dial plans on page 91

SIP

52

Image 52

Contents SL4020 Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony Codecs System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables Audience About this guideStructure Precautions Safety when working with electricityGeneral observations Typographical conventions used in this documentGeneral conventions SmartLink 4020 Getting Started GuideAbout this guide Chapter contents General informationSmartLink 4020 overview SmartLinkSmartLink installation Installing the router Do the followingConnect to the Internet service provider Connecting the SmartLink to the network Home System information System UptimeSystem information System Status Network-WAN Network-WAN Status Network SettingsInterface Status Settings Device Operating Mode Internet ConﬁgurationObtain WAN conﬁguration dynamically Specify ﬁxed WAN conﬁgurationEnable PPPoE AuthenticationSettings WAN PPPoE ConﬁgurationMTU Size MAC Spooﬁng ConﬁgurationInternet Vlan Conﬁguration QoS Quality of Service Enable Voice QoSSaving your work Assured Bandwidth for VoiceToS/DiffServ TOS/DiffServ windowIPSec Conﬁguration Outbound AH Authentication Algorithm Outbound AH Authentication Key HEXOutbound ESP Authentication Algorithm Outbound ESP Authentication Key HEXInbound ESP Authentication Key HEX Network-LAN Dhcp Server Settings Client Network InformationStatic Address Assignment Viewing the Dchp Client TableRouting Dynamic RoutingStatic Routing Viewing the Routing TablePort Forwarding Reserved PortsPort Forwarding to LAN De-Militarized ZoneIP Filtering Service AccessFilter IP Range Ping Reply Telephony Telephony Line 2 Speed Dial Settings Speed Dial Serv VoIP Server Registration Status VoIP StatusPhone Line Status Gateway Settings SIP Server SettingsSIP Conﬁguration SIP Extensions RTP Telephone Event ConﬁgurationSIP Timer Values sec VoIP Vlan ConﬁgurationSIP Parameters Hook Flash Mime TypeNAT Traversal Packetization Audio/CODEC ConﬁgurationJitter Buffer Phone 1 & Phone User InformationPhone Number User NameSupplementary Service Settings Call Transfer Serv IP Dialing ServMWI Serv Speed Dial ServCall Forward Settings Dial Out TypeSelective Call Forward Settings Distinctive Ring SettingsHttp Digest Setting Incoming Call BlockSpeed Dial Line 1 Speed Dial SettingsSpeed Dial 1-8 Phone Number/IP Dialing Line 2 Speed Dial Settings System System System Set Security Password New Root PasswordNew User Password Conﬁrm new passwordConﬁguration LoggingAuto Upgrade Manual UpgradeEnable Auto Upgrade Auto Upgrade Protocol Upgrade ServerAuto Upgrade URL LocalizationDistinctive Ring Setting Supplementary Service Keys Dist Ring Act Keys Warm Line Act KeysDND Act Keys IP Dialing Act KeysControl Timer Values Ring Setting MiscellaneousFXS Port Polarity Conﬁguration Snmp ConﬁgurationSnmp Trap Conﬁguration Snmp Community Conﬁguration Snmp System ConﬁgurationReload Documentation Introduction Documentation linkLogout Logout window Contacting Patton for assistance Contact information Warranty coveragePatton support headquarters in the USA Out-of-warranty service Returns for creditReturn for credit policy RMA numbersAppendix a Compliance information FCC Warning Radio and TV Interference ComplianceCE-Mark Warning Appendix B Speciﬁcations Voice Processing signalling dependent Voice ConnectivityConnectivity Fax and Modem SupportVoice Services/Features IP ServicesManagement Operating EnvironmentAppendix C Dial plans Sample Dial Plans Simple Dial PlanNon-dialed Line Dial Plan Complex Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF Appendix E Ring Cadence Conﬁguration Following is a sample ring cadence patter conﬁguration