Patton electronic SL4020 manual Settings

Page 32

SmartLink 4020 Getting Started Guide

4 • Network—WAN

 

 

Subnet Mask

The subnet mask is 32-bit number that filters a destination IP address to determine to which subnet it belongs. For example, a subnet mask of 255.255.0.0 for a network ID of 192.5.0.0 tells the switch to accept traffic des- tined for IP addresses that begin with 192.5—all other packets are ignored.

Default Gateway

The IP address of the gateway. The gateway IP address can be retrieved automatically in DHCP mode or be set up manually with a fixed IP address.

Domain name

The network domain of the SmartLink.

DNS address

Refers to the address of your domain name server, if applicable.

VLAN

VLAN tag value encoded in the WAN Ethernet header in all outgoing packets

Priority Tag

Priority tag value encoded in the WAN Ethernet header in outgoing packets.

Settings

The Settings window contains the following sections:

•Internet Configuration (see figure 6 on page 33)

•WAN PPPoE Configuration (see figure 7 on page 34)

•MAC Spoofing Configuration (see figure 8 on page 35)

•MTU (see figure 9 on page 35)

•Internet VLAN Configuration (see figure 8 on page 35)

Note After configuring the sections, click the Save Internet Settings button (see figure 5 on page 31) to save the new configuration.

Settings

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents SL4020 Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony Codecs System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables Structure About this guideAudience Precautions Safety when working with electricityGeneral conventions Typographical conventions used in this documentGeneral observations SmartLink 4020 Getting Started GuideAbout this guide Chapter contents General informationSmartLink 4020 overview SmartLinkSmartLink installation Installing the router Do the followingConnect to the Internet service provider Connecting the SmartLink to the network Home System information System UptimeSystem information System Status Network-WAN Network-WAN Interface Status Network SettingsStatus Settings Device Operating Mode Internet ConfigurationObtain WAN configuration dynamically Specify fixed WAN configurationEnable PPPoE AuthenticationSettings WAN PPPoE ConfigurationInternet Vlan Configuration MAC Spoofing ConfigurationMTU Size QoS Quality of Service Enable Voice QoSSaving your work Assured Bandwidth for VoiceToS/DiffServ TOS/DiffServ windowIPSec Configuration Outbound AH Authentication Algorithm Outbound AH Authentication Key HEXOutbound ESP Authentication Algorithm Outbound ESP Authentication Key HEXInbound ESP Authentication Key HEX Network-LAN Dhcp Server Settings Client Network InformationStatic Address Assignment Viewing the Dchp Client TableRouting Dynamic RoutingStatic Routing Viewing the Routing TablePort Forwarding Reserved PortsPort Forwarding to LAN De-Militarized ZoneFilter IP Range Service AccessIP Filtering Ping Reply Telephony Telephony Line 2 Speed Dial Settings Speed Dial Serv Phone Line Status VoIP StatusVoIP Server Registration Status SIP Configuration SIP Server SettingsGateway Settings SIP Extensions RTP Telephone Event ConfigurationSIP Timer Values sec VoIP Vlan ConfigurationSIP Parameters Hook Flash Mime TypeNAT Traversal Jitter Buffer Audio/CODEC ConfigurationPacketization Phone 1 & Phone User InformationPhone Number User NameSupplementary Service Settings Call Transfer Serv IP Dialing ServMWI Serv Speed Dial ServCall Forward Settings Dial Out TypeSelective Call Forward Settings Distinctive Ring SettingsHttp Digest Setting Incoming Call BlockSpeed Dial 1-8 Phone Number/IP Dialing Line 1 Speed Dial SettingsSpeed Dial Line 2 Speed Dial Settings System System System Set Security Password New Root PasswordNew User Password Confirm new passwordConfiguration LoggingEnable Auto Upgrade Manual UpgradeAuto Upgrade Auto Upgrade Protocol Upgrade ServerAuto Upgrade URL LocalizationDistinctive Ring Setting Supplementary Service Keys Dist Ring Act Keys Warm Line Act KeysDND Act Keys IP Dialing Act KeysControl Timer Values Ring Setting MiscellaneousSnmp Trap Configuration Snmp ConfigurationFXS Port Polarity Configuration Snmp Community Configuration Snmp System ConfigurationReload Documentation Introduction Documentation linkLogout Logout window Contacting Patton for assistance Patton support headquarters in the USA Warranty coverageContact information Out-of-warranty service Returns for creditReturn for credit policy RMA numbersAppendix a Compliance information CE-Mark Warning ComplianceFCC Warning Radio and TV Interference Appendix B Specifications Voice Processing signalling dependent Voice ConnectivityConnectivity Fax and Modem SupportVoice Services/Features IP ServicesManagement Operating EnvironmentAppendix C Dial plans Sample Dial Plans Simple Dial PlanNon-dialed Line Dial Plan Complex Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF Appendix E Ring Cadence Configuration Following is a sample ring cadence patter configuration
Top Page Image Contents