Patton electronic SL4020 manual Following is a sample ring cadence patter configuration

SmartLink 4020 Getting Started Guide E • Ring Cadence Configuration

Introduction

The following is a sample ring cadence patter configuration:

Timeval ::= time in milliseconds

Repeatval ::= # of cycles to repeat

Tonename ::= "RING_0" "RING_1" "RING_2" "RING_3" "RING_4"

"RING_5" "RING_6" "RING_7" "RING_8" "RING_9" Idle ::= "IDLE"

Active ::= "ON" "OFF"

Inactive ::= Idle "(" Timeval ")" Active ::= Active "(" Timeval ")" Sequence ::= Active Active "," Sequence Repetition ::= "[" Sequence "]" Repeatval Repeat ::= "R"

Cycle ::= Sequence Repetition

Fullsequence ::= Cycle Cycle "," Fullsequence

Cadence ::= Fullsequence Fullsequence "," Repeat Fullsequence "," Inactive "," Repeat

Ring ::= Cadence

For the ring cadence pattern above, the configuration would be:

RING_0 ON(200),OFF(300),ON(100),OFF(400),ON(200),OFF(4000),R

Note The Bellcore standard ring cadence patterns are shown in table 3.

	Table 3. Bellcore standard ring cadence patterns
Name	Value
RING_0	ON(2000), IDLE(4000), R
RING_1	ON(800), OFF(400), ON(800), IDLE(4000), R
RING_2	ON(400),OFF(200)]2,ON(800),IDLE(4000),R
RING_3	ON(300), OFF(200), ON(1000), OFF(200), ON(300), IDLE(4000), R
RING_4	ON(500)
RING_5

Introduction 97