
SmartLink 4020 Getting Started Guide | 7 • System |
|
|
Configuration
Figure 40. Configuration window
Logging
Enable Syslog
Enable or disable system logging.
Syslog Server
Specify the syslog server IP address. This feature specifies the server for logging IAD system information and critical events.
Enable Debug
Enable or disable System Debug.
Debug Server
The debug server IP address and port. This feature specifies the server for logging IAD debug information. The level of detailed output depends on the debug level parameter setting.
Debug Connect Port
The port number of the debug server to be used for receiving debug messages from the IAD.
Saving your work
When you are finished configuring settings, click the Save button to save the changes.
Configuration | 68 |