TP-Link manual Factory Defaults, TL-WR340G/TL-WR340GD, 54Mbps Wireless Router User Guide

Page 73

4.12.4 Factory Defaults

TL-WR340G/TL-WR340GD

54Mbps Wireless Router User Guide

Figure 3-59 Firmware Upgrade

New firmware is posted at http://www.tp-link.com and can be downloaded for free. If the router is not experiencing difficulties, there is no need to upgrade firmware, unless the new firmware supports a new feature you need.

)Note:

When you upgrade the router's firmware, you will lose current configuration settings, so make sure you backup the router’s settings before you upgrade its firmware.

To upgrade the router's firmware, follow these instructions:

1.Download the latest firmware upgrade file from the TP-LINK website http://www.tp-link.com.

2.Click Browse to view the folders and select the downloaded file.

3.Click the Upgrade button.

¾Firmware Version - Displays the current firmware version.

¾Hardware Version - Displays the current hardware version. The hardware version of the upgrade file must accord with the current hardware version.

)Note:

Do not turn off the router or press the Reset button while the firmware is being upgraded. The router will reboot after the Upgrading has been finished.

4.12.4 Factory Defaults

This page (shown in Figure 3-60)allows you to restore the factory default settings for the router.

Figure 3-60 Restore Factory Default

Click the Restore button to reset all configuration settings to their default values.

¾The default User Name: admin

¾The default Password: admin

¾The default IP Address: 192.168.1.1

¾The default Subnet Mask: 255.255.255.0

)Note:

Any settings you have saved will be lost when the default settings are restored. 66

Image 73

Contents Rev 1.0.4 TL-WR340G TL-WR340GD 54Mbps Wireless RouterAll rights reserved COPYRIGHT & TRADEMARKSFCC RF Radiation Exposure Statement FCC STATEMENTCE Mark Warning 2400.0-2483.5 MHz National RestrictionsCountry RestrictionProduct Description 54Mbps Wireless Router DECLARATION OF CONFORMITYModel No. TL-WR340G/TL-WR340GD ETSI EN 300Package Contents CONTENTSHardware Installation Chapter 3. Quick Installation GuideAppendix B Configuring the PC Appendix A FAQAppendix C Specifications Appendix C GlossaryConventions Package ContentsChapter 1.Introduction 1.2 Main Features1.1 Product Overview 54Mbps Wireless Router User Guide¾ Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/2/1Mbps data transfer rates 2.1 The Front Panel Chapter 2.Hardware InstallationLED Explanation Indication2.3 System Requirements 2.2 The Back Panel2.5 Connecting the Device 2.4 Installation Environment Requirements2.6 Configure PC TL-WR340G/TL-WR340GD ¾ Configure the IP address manually Please check it following these steps 3.1 TCP/IP Configuration Chapter 3.Quick Installation GuidePlease check the connection following these steps Figure 3-1 Success result of Ping command3.2 Quick Installation Guide Figure 3-5 Quick Setup Figure 3-8 Quick Setup - Static IP 6. Click the Next button. You will then see the Finish page 4.1 Login Chapter 4.Software Configuration4.2 Status Please refer to Quick Installation Guide 4.3 Quick Setup4.4.1 LAN 4.4 Network4.4.2 WAN Figure 3-4 WAN - Dynamic IP Figure 3-5 WAN - Static IP Figure 3-6 WAN - PPPoE 3-7 will then appear Figure 3-7 PPPoE Advanced Settings Figure 3-8 802.1X + Dynamic IP Settings TL-WR340G/TL-WR340GD QLD - qld.bigpond.net.au NSW / ACT - nsw.bigpond.net.auTL-WR340G/TL-WR340GD 54Mbps Wireless Router User GuideTL-WR340G/TL-WR340GD ¾ Connect on Demand - You can configure the router to disconnect from your Internet connection after a specified period of inactivity Max Idle Time. If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise TL-WR340G/TL-WR340GD 54Mbps Wireless Router User GuideTL-WR340G/TL-WR340GD 54Mbps Wireless Router User GuideTL-WR340G/TL-WR340GD 4.4.3 MAC Clone 4.5 Wireless4.5.1 Wireless Settings TL-WR340G/TL-WR340GD WEP - Select WEP authentication type based on 802.11 authentications Figure 3-19 WPA-PSK/WPA2-PSK 4.5.2 MAC Filtering 5. Click the Save button to save this entry 4.5.3 Wireless Statistics 4.6 DHCP 4.6.1 DHCP Settings4.6.3 Address Reservation 4.6.2 DHCP Clients ListTo Reserve IP addresses The function wont take effect until the router reboots4.7.1 Virtual Servers 4.7 ForwardingTo setup a virtual server entry 4.7.2 Port Triggering TL-WR340G/TL-WR340GD 4.7.3 DMZ 4.7.4 UPnP 4.8.1 Firewall 4.8 Security4.8.2 IP Address Filtering 4.8.3 Domain Filtering TL-WR340G/TL-WR340GD 4.8.4 MAC Address Filtering 4.8.5 Remote Management 4.8.6 Advanced Security 4.9 Static Routing To add static routing entries 4.10.1 Binding Setting 4.10 IP & MAC Binding SettingTL-WR340G/TL-WR340GD 54Mbps Wireless Router User Guide To add IP & MAC Binding entries 4.10.2 ARP ListTo modify or delete an existing entry To find an existing entry4.11.1 Dyndns.org DDNS 4.11 Dynamic DNS4.11.2 Oray.net DDNS 4.11.3 Comexe.cn DDNS 4.12.1 Time 4.12 System Tools1. Select using daylight saving time 4.12.2 Diagnostic4.12.3 Firmware 4.12.4 Factory Defaults 4.12.6 Reboot 4.12.5 Backup & Restore4.12.8 Syslog 4.12.7 PasswordStatistics Table 4.12.9 StatisticsIP Address Total1. How do I configure the router to access Internet by ADSL users? Appendix A FAQ3. I want to use Netmeeting, what do I need to do? MAC CloneRemote Management 4. I want to build a WEB Server on the LAN, what should I do?Virtual Server 1. Configure TCP/IP component Appendix B Configuring the PC¾ Setting IP address automatically Now you have two ways to configure the TCP/IP protocol belowshown in the Figure below 1 Select Use the following IP address radio button. And the following items available ¾ Setting IP address manuallyClick OK to keep your settings Appendix C SpecificationsPhysical and Environment Appendix C Glossary

Related manuals

Manual 2 pages 7.63 Kb