TP-Link manual MAC Clone, TL-WR340G/TL-WR340GD, 54Mbps Wireless Router User Guide

TL-WR340G/TL-WR340GD

54Mbps Wireless Router User Guide

address in dotted-decimal notation of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it as well.

Click the Save button to save your settings.

4.4.3MAC Clone

You can configure the MAC address of the WAN port on this page, Figure 3-15:

Figure 3-15 MAC Address Clone

Some ISPs require that you register the MAC Address of your adapter, which is connected to your cable/DSL Modem or Ethernet during installation. Changes are rarely needed here.

¾WAN MAC Address - This field displays the current MAC address of the WAN port, which is used for the WAN port. If your ISP requires that you register the MAC address, please enter the correct MAC address into this field. The format for the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).

¾Your PC's MAC Address - This field displays the MAC address of the PC that is managing the router. If the MAC address is required, you can click the Clone MAC Address button and this MAC address will fill in the WAN MAC Address field.

Click Restore Factory MAC to restore the MAC address of WAN port to the factory default value.

Click the Save button to save your settings.

)Note:

Only the PC on your LAN can use the MAC Address Clone feature.

If you click the Save button, the router will prompt you to reboot.

4.5Wireless

Figure 3-16 Wireless menu

33