54Mbps Wireless Router User Guide
There are three submenus under the Wireless menu (shown in Figure 3-16):Wireless Settings, MAC Filtering and Wireless Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.
4.5.1Wireless Settings
The basic settings for the wireless network are set on this page, Figure 3-17:
Figure 3-17 Wireless Settings
¾SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all wireless devices in your network. The default SSID is TP-LINK, but it is recommended strongly that you change your networks name (SSID) to a different value. This value is case-sensitive. For example, TEST is NOT the same as test.
¾Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the router can be used. It may be illegal to use the wireless function of the router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance.
The default region is United States. When you select your local region from the pull-down list, Click the Save button, then the Note Dialog appears. Click OK.
