TP-Link TL-WR340G/TL-WR340GD, 54Mbps Wireless Router User Guide, Statistics Table, Total

Page 76
4.12.9 Statistics

TL-WR340G/TL-WR340GD

54Mbps Wireless Router User Guide

4.12.9 Statistics

The Statistics page (shown in Figure 3-65)displays the network traffic of each PC in LAN, including total traffic and traffic of the last Packets Statistic interval seconds.

Figure 3-65 Statistics

¾Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click the Enable button. If disabled, the function of DoS protection in Security settings will be ineffective.

¾Packets Statistics Interval - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval indicates the time section of the packets statistic.

¾Sorted Rules - Here displays sort as desired.

Statistics Table:

IP Address

The IP Address displayed with statistics

 

 

 

Total

Packets

The total amount of packets received and transmitted by the

router.

 

 

Bytes

The total amount of bytes received and transmitted by the router.

 

Packets

The total amount of packets received and transmitted in the last

 

Packets Statistic interval seconds.

 

 

 

Bytes

The total amount of bytes received and transmitted in the last

 

Packets Statistic interval seconds.

 

 

Current

ICMP Tx

The total amount of the ICMP packets transmitted to WAN in the

last Packets Statistic interval seconds.

 

 

 

UDP Tx

The total amount of the UDP packets transmitted to WAN in the

 

last Packets Statistic interval seconds.

 

 

 

TCP SYN Tx

The total amount of the TCP SYN packets transmitted to WAN in

 

the last Packets Statistic interval seconds.

 

 

Click the Save button to save the Packets Statistic interval value.

Click the Auto-refreshcheckbox to refresh automatically.

Click the Refresh button to refresh immediately.

69

Page 75 Page 77
Image 76
Page 75 Page 77
Contents TL-WR340G TL-WR340GD 54Mbps Wireless Router Rev 1.0.4COPYRIGHT & TRADEMARKS All rights reservedFCC RF Radiation Exposure Statement FCC STATEMENTCE Mark Warning National Restrictions 2400.0-2483.5 MHzCountry RestrictionDECLARATION OF CONFORMITY Product Description 54Mbps Wireless RouterModel No. TL-WR340G/TL-WR340GD ETSI EN 300CONTENTS Package ContentsHardware Installation Chapter 3. Quick Installation GuideAppendix A FAQ Appendix B Configuring the PCAppendix C Specifications Appendix C GlossaryPackage Contents Conventions1.2 Main Features Chapter 1.Introduction1.1 Product Overview 54Mbps Wireless Router User Guide¾ Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/2/1Mbps data transfer rates Chapter 2.Hardware Installation 2.1 The Front PanelLED Explanation Indication2.2 The Back Panel 2.3 System Requirements2.4 Installation Environment Requirements 2.5 Connecting the Device2.6 Configure PC 54Mbps Wireless Router User Guide ¾ Configure the IP address manually Please check it following these steps Chapter 3.Quick Installation Guide 3.1 TCP/IP ConfigurationFigure 3-1 Success result of Ping command Please check the connection following these steps3.2 Quick Installation Guide Figure 3-5 Quick Setup Figure 3-8 Quick Setup - Static IP 6. Click the Next button. You will then see the Finish page 4.1 Login Chapter 4.Software Configuration4.2 Status 4.3 Quick Setup Please refer to Quick Installation Guide4.4.1 LAN 4.4 Network4.4.2 WAN Figure 3-4 WAN - Dynamic IP Figure 3-5 WAN - Static IP Figure 3-6 WAN - PPPoE 3-7 will then appear Figure 3-7 PPPoE Advanced Settings Figure 3-8 802.1X + Dynamic IP Settings 54Mbps Wireless Router User Guide NSW / ACT - nsw.bigpond.net.au QLD - qld.bigpond.net.au54Mbps Wireless Router User Guide TL-WR340G/TL-WR340GD54Mbps Wireless Router User Guide ¾ Connect on Demand - You can configure the router to disconnect from your Internet connection after a specified period of inactivity Max Idle Time. If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise 54Mbps Wireless Router User Guide TL-WR340G/TL-WR340GD54Mbps Wireless Router User Guide TL-WR340G/TL-WR340GD54Mbps Wireless Router User Guide 4.5 Wireless 4.4.3 MAC Clone4.5.1 Wireless Settings 54Mbps Wireless Router User Guide WEP - Select WEP authentication type based on 802.11 authentications Figure 3-19 WPA-PSK/WPA2-PSK 4.5.2 MAC Filtering 5. Click the Save button to save this entry 4.5.3 Wireless Statistics 4.6.1 DHCP Settings 4.6 DHCP4.6.2 DHCP Clients List 4.6.3 Address ReservationThe function wont take effect until the router reboots To Reserve IP addresses4.7.1 Virtual Servers 4.7 ForwardingTo setup a virtual server entry 4.7.2 Port Triggering 54Mbps Wireless Router User Guide 4.7.3 DMZ 4.7.4 UPnP 4.8 Security 4.8.1 Firewall4.8.2 IP Address Filtering 4.8.3 Domain Filtering 54Mbps Wireless Router User Guide 4.8.4 MAC Address Filtering 4.8.5 Remote Management 4.8.6 Advanced Security 4.9 Static Routing To add static routing entries 4.10.1 Binding Setting 4.10 IP & MAC Binding SettingTL-WR340G/TL-WR340GD 54Mbps Wireless Router User Guide 4.10.2 ARP List To add IP & MAC Binding entriesTo modify or delete an existing entry To find an existing entry4.11 Dynamic DNS 4.11.1 Dyndns.org DDNS4.11.2 Oray.net DDNS 4.11.3 Comexe.cn DDNS 4.12 System Tools 4.12.1 Time4.12.2 Diagnostic 1. Select using daylight saving time4.12.3 Firmware 4.12.4 Factory Defaults 4.12.5 Backup & Restore 4.12.6 Reboot4.12.7 Password 4.12.8 Syslog4.12.9 Statistics Statistics TableIP Address TotalAppendix A FAQ 1. How do I configure the router to access Internet by ADSL users?MAC Clone 3. I want to use Netmeeting, what do I need to do?4. I want to build a WEB Server on the LAN, what should I do? Remote ManagementVirtual Server Appendix B Configuring the PC 1. Configure TCP/IP component¾ Setting IP address automatically Now you have two ways to configure the TCP/IP protocol belowshown in the Figure below ¾ Setting IP address manually 1 Select Use the following IP address radio button. And the following items availableClick OK to keep your settings Appendix C SpecificationsPhysical and Environment Appendix C Glossary
Related manuals
Manual 2 pages 7.63 Kb
Top Page Image Contents