TP-Link manual TL-WA901ND300Mbps Wireless N Access Point User Guide

Page 44

TL-WA901ND300Mbps Wireless N Access Point User Guide

Note:

Limited by local law regulations, version for North America does not have region selection option.

Channel - Determines the operating frequency to be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.

Mode - Select the desired wireless mode. The options are:

•11b only - Only 802.11b wireless stations can connect to the device.

•11g only - Only 802.11g wireless stations can connect to the device.

•11n only - Only 802.11n wireless stations can connect to the device.

•11bg mixed - Both 802.11b and 802.11g wireless stations can connect to the device.

•11bgn mixed - All 802.11b, 802.11g and 802.11n wireless stations can connect to the device.

Channel Width - Determines the channel width to be used. It is unnecessary to change the default value unless required.

Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations to access the device.

Click the Survey button to detect the SSIDs in the local area.

Note:

To apply any settings you have altered on the page, please click the Save button, and then you will be reminded to reboot the device.

36

Image 44

Contents TL-WA901ND Copyright & Trademarks FCC Statement Korea Warning Statements Safety Information Product Description 300Mbps Wireless N Access Point Yang Hongliang Product Manager of International BusinessContents Factory Defaults Backup & Restore Reboot Password System Log Package Contents Conventions IntroductionProduct Overview Main Features AppearanceFront Panel LED Explanation Name Status Indication Used as Reset button Rear PanelTL-WA901ND  Used as WPS buttonHardware Installation Connecting the DeviceBefore You Begin Basic Requirements Note TL-WA901ND300Mbps Wireless N Access Point User Guide Quick Installation Guide Quick SetupQuick Setup TL-WA901ND300Mbps Wireless N Access Point User Guide TL-WA901ND300Mbps Wireless N Access Point User Guide TL-WA901ND300Mbps Wireless N Access Point User Guide TL-WA901ND300Mbps Wireless N Access Point User Guide 12 Network Setting 13 Quick Setup Finish Configure the Device LoginStatus WPS Device Status ClientMethod One To add a new deviceBy PBC Method Two Method Three Add a New DeviceII. By PIN Enter the PIN Click ConnectNetwork Wireless Wireless Settings Wireless menu Note TL-WA901ND300Mbps Wireless N Access Point User Guide Configure the Access Point TL-WA901ND300Mbps Wireless N Access Point User Guide Port Configure the SwitchEgress Rule Processing mode of Utag Frames  Note 13 Wireless Settings in Repeater mode 14 Wireless Settings in Repeater mode TL-WA901ND300Mbps Wireless N Access Point User Guide 15 Wireless Settings in Bridge with AP mode Wireless Security Access Point TL-WA901ND Multi-SSID Client TL-WA901ND300Mbps Wireless N Access Point User Guide WDS Repeater 20 Wireless Security Repeater Universal RepeaterTL-WA901ND300Mbps Wireless N Access Point User Guide Bridge with AP TL-WA901ND Wireless MAC Filtering To set up an entry, follow these instructions To modify or delete an existing entryWireless Advanced Wireless Statistics Throughput MonitorDhcp 27 The Dhcp menuDhcp Settings Dhcp Clients List Address ReservationSystem Tools To Reserve IP addressesTo modify a Reserved IP address To delete all Reserved IP addresses Click Clear AllSnmp 31 The System Tools menuDiagnostic TL-WA901ND300Mbps Wireless N Access Point User Guide 34 Diagnostic Results Ping Watch DogFirmware Upgrade To upgrade the devices firmware, follow these instructionsFactory Defaults Backup & RestoreReboot PasswordSystem Log Appendix a Application Example TL-WA901ND TL-WA901ND300Mbps Wireless N Access Point User Guide Appendix B Factory Defaults Default ValueCommon Default Settings WirelessAppendix C Troubleshooting T2. What can I do if I forget my password?Physical and Environment Appendix D SpecificationsGeneral Appendix E Glossary TL-WA901ND300Mbps Wireless N Access Point User Guide