TP-Link TL-WA901ND manual Dhcp Clients List, Address Reservation

Page 63

TL-WA901ND300Mbps Wireless N Access Point User Guide

Note:

1.When the device is working on Dynamic IP mode, the DHCP Server function will be disabled.

2.To use the DHCP server function of the device, you should configure all computers in the LAN as "Obtain an IP Address automatically" mode. This function will not take effect until the device reboots.

4.7.2 DHCP Clients List

Selecting DHCP > DHCP Clients List will enable you to view the Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the device (Figure 4-29).

Figure 4-29 DHCP Clients List

ID - Here displays the index of the DHCP client.

Client Name - Here displays the name of the DHCP client.

MAC Address - Here displays the MAC address of the DHCP client.

Assigned IP - Here displays the IP address that the AP has allocated to the DHCP client.

Lease Time - Here displays the time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically.

You cannot change any of the values on this page. To update this page and to show the current attached devices, click on the Refresh button.

4.7.3 Address Reservation

Selecting DHCP > Address Reservation will enable you to specify a reserved IP address for a PC on the LAN, so the PC will always obtain the same IP address each time when it accesses the AP. Reserved IP addresses should be assigned to servers that require permanent IP settings. The screen below is used for address reservation (shown in Figure 4-30).

Figure 4-30 Address Reservation

55

Image 63

Contents TL-WA901ND Copyright & Trademarks FCC Statement Korea Warning Statements Safety Information Yang Hongliang Product Manager of International Business Product Description 300Mbps Wireless N Access PointContents Factory Defaults Backup & Restore Reboot Password System Log Package Contents Introduction Product OverviewConventions LED Explanation Name Status Indication Main FeaturesAppearance Front PanelRear Panel  Used as Reset button Used as WPS button TL-WA901NDBasic Requirements Hardware InstallationConnecting the Device Before You Begin Note TL-WA901ND300Mbps Wireless N Access Point User Guide Quick Setup Quick Installation GuideQuick Setup TL-WA901ND300Mbps Wireless N Access Point User Guide TL-WA901ND300Mbps Wireless N Access Point User Guide TL-WA901ND300Mbps Wireless N Access Point User Guide TL-WA901ND300Mbps Wireless N Access Point User Guide 12 Network Setting 13 Quick Setup Finish Login Configure the DeviceStatus Device Status Client WPSTo add a new device By PBCMethod One Method Two Add a New Device Method ThreeII. By PIN Click Connect Enter the PINNetwork Wireless Wireless menu Wireless Settings Note TL-WA901ND300Mbps Wireless N Access Point User Guide Configure the Access Point TL-WA901ND300Mbps Wireless N Access Point User Guide Configure the Switch Egress Rule Processing mode of Utag FramesPort  Note 13 Wireless Settings in Repeater mode 14 Wireless Settings in Repeater mode TL-WA901ND300Mbps Wireless N Access Point User Guide 15 Wireless Settings in Bridge with AP mode Wireless Security Access Point TL-WA901ND Multi-SSID Client TL-WA901ND300Mbps Wireless N Access Point User Guide WDS Repeater Universal Repeater 20 Wireless Security RepeaterTL-WA901ND300Mbps Wireless N Access Point User Guide Bridge with AP TL-WA901ND Wireless MAC Filtering To modify or delete an existing entry To set up an entry, follow these instructionsWireless Advanced Throughput Monitor Wireless Statistics27 The Dhcp menu DhcpDhcp Settings Address Reservation Dhcp Clients ListTo delete all Reserved IP addresses Click Clear All System ToolsTo Reserve IP addresses To modify a Reserved IP address31 The System Tools menu SnmpDiagnostic TL-WA901ND300Mbps Wireless N Access Point User Guide Ping Watch Dog 34 Diagnostic ResultsTo upgrade the devices firmware, follow these instructions Firmware UpgradeBackup & Restore Factory DefaultsPassword RebootSystem Log Appendix a Application Example TL-WA901ND TL-WA901ND300Mbps Wireless N Access Point User Guide Wireless Appendix B Factory DefaultsDefault Value Common Default SettingsT2. What can I do if I forget my password? Appendix C TroubleshootingAppendix D Specifications GeneralPhysical and Environment Appendix E Glossary TL-WA901ND300Mbps Wireless N Access Point User Guide