TP-Link TL-SG3424 manual LEDs

Page 6

L2 Managed Switch

LEDs

LED

Status

Indication

 

 

 

 

On

The switch is powered on.

 

 

 

PWR

Off

The switch is powered off or power supply is abnormal.

 

 

 

 

Flashing

Power supply is abnormal.

 

 

 

SYS

Flashing

The switch works properly.

 

 

On/Off

The switch works improperly.

 

 

 

 

 

On

A device is linked to the corresponding port.

 

 

 

 

Flashing

Data is being transmitted or received.

 

 

 

10/100/1000M

Green

The linked device is running at 1000Mbps.

 

 

 

 

Yellow

The linked device is running at 10/100Mbps.

 

 

 

 

Off

No device is connected to the corresponding port.

 

 

 

 

On

A device is linked to the corresponding port.

 

 

 

1000M

Flashing

Data is being transmitted or received.

 

 

 

 

Off

No device is connected to the corresponding port.

 

 

 

The front panel of TL-SG3216 is shown as the following figure.

Console Port

LEDs

10/100/1000Mbps RJ45 Port

SFP Port

FFFFFFFFFFFFFront Panel of TL-SG3216

The front panel of TL-SG3424 is shown as the following figure.

21F

23F

Console Port

LEDs

10/100/1000Mbps RJ45 Port

SFP Port

FFFFFFFFFFFFFront Panel of TL-SG3424

LEDs

LED

Status

Indication

 

 

 

 

On

The switch is powered on.

 

 

 

Power

Off

The switch is powered off or power supply is abnormal.

 

 

 

 

Flashing

Power supply is abnormal.

 

 

 

System

Flashing

The switch works properly.

 

 

On/Off

The switch works improperly.

 

 

 

 

02 Introduction

Image 6
Contents Installation Guide Copyright & Trademarks FCC Statement Audience Contents Appearance CCCCCCCCCCCIntroductionProduct Overview Front PanelLEDs Front panel of TL-SG3424P is shown as the following figure Port Feature Rear PanelGrounding Terminal CCCCCCCCCCCInstallation Package Contents2222Safety Precautions Clearness Electromagnetic InterferenceLightening Protection Installation Site 2222Installation Tools2222Product Installation Desktop InstallationRack Installation Requirements for Cabling Outdoors CCCCCCCCCCCLightning ProtectionCabling Reasonably Requirements for Cabling IndoorsEthernet Cable Connecting to the Grounding Bar Connecting to the Ground via the Power Supply3333Connect to Ground 3333Equipotential Bonding 3333Use Lightning Arrester CCCCCCCCCCCConnection Ethernet Port4444SFP Port 4444Verify Installation 4444Power On4444Console Port For TL-SG3210 Switch 4444InitializationCCCCCCCCCCCConfiguration Configure the Switch via GUI5555Configure the Switch Using CLI Logon by a Console PortSelect the port to connect in -6, and click OK Logon by Telnet Type cmd in the prompt Run window as -10 and click OK FFFFFFFFFFFFFLog in the Switch AAAAAAAAAAAATroubleshooting Qqqq Why does the Power LED work abnormally?AAAAAAAAAAAAHardware Specifications AAAAAAAAAAAATechnical Support L2 Managed Switch Tel +86 755 Mail support@tp-link.com 7106504453 REV2.0.0