Polycom 1725-22886-001/A manual Power on the System

Page 16

Setting Up the Polycom Instructor RP

Power on the System

1

Connect the external power cord to a power outlet.

2

Power on the standard and optional equipment.

•Open the front doors of the cabinet and power on the annotation box.

•Power on the VSX 8000.

•Power on any other equipment you have, such as an integrated computer, a document camera, or a VCR or DVD player.

VSX 8000 power button	Annotation box power button

3

Press the green projector lamp power button on the pen tray.

The system takes about a minute to start.

Projector lamp power button

10

Image 16

Contents Setting Up the Polycom Instructor RP Trademark Information About this Guide Setting Up the Polycom Instructor RP Contents Setting Up the Polycom Instructor RP Setting Up the Polycom Instructor RP Unpack and Position the System Prepare to Install the Equipment You should find these accessory boxesRemove the rear access panel from the cabinet Connect the Standard Equipment Connect the Optional Equipment Connect the Optional Equipment Connect a guest laptop to the Polycom Instructor RP system Complete the Equipment Installation Power on the System Check the Screens and Run the Wizard Calibrate the Annotation Box Calibrate the Annotation Box Setting Up the Polycom Instructor RP Install the Software and Complete the Calibration Rear Projection Smart Board 3000i Installation GuideConfigure and Use the System User’s GuideTroubleshooting If the system It often means Correct it this wayIf the system It often means Correct it this way