Install the Software and Complete the Calibration
Install the Software and Complete the Calibration
1
If you have an integrated computer connected to your Polycom Instructor RP system, install the Polycom Instructor Tools software on it.
If you do not have an integrated computer, skip this step.
The Polycom Instructor Tools software is on the Polycom CD. You simply need to insert the CD into the integrated computer and then follow the Setup Wizard.
2
Install the SMART Board software.
The SMART Board software is on the SMART CD. You simply need to insert the CD into the
integrated computer and then follow the SetupSMART Wizard.
3
Calibrate the touch screen for the SMART interactive whiteboard.
To calibrate the touch screen for the SMART interactive whiteboard:
1. | Press the SMART Board button on the |
|
|
| SMART tray. |
|
|
2. | Select Orient. |
|
|
3. | Follow the |
|
|
| sure you press your finger squarely on each |
|
|
| crosshair. |
|
|
| For more information, refer to the “Orienting |
|
|
| the Interactive Whiteboard” section of the |
|
|
| Rear Projection SMART Board 3000i Installation |
|
|
| Guide. | SMART Board button | |
|
| ||
4. | Press or draw on the screen with your finger |
|
|
| to check that the calibration worked |
|
|
| correctly. |
|
|
|
|
| |
|
|
|
|
15