Polycom 1725-22886-001/A manual Connect the Optional Equipment

Page 12

Setting Up the Polycom Instructor RP

Connect the Optional Equipment

1

Connect a document camera or another S-video device, such as an auxiliary PowerCam, to the Polycom Instructor RP.

1.Place the document camera or other S-video device wherever you want to locate it.

2.Find the S-video cable in the back of the Polycom Instructor RP system. One end of

the cable is already connected to the system. Connect the other end to your document camera or other S-video device.

2

Connect a VCR or DVD player to the Polycom Instructor RP.

1.Place your VCR or DVD player on the shelf in the Polycom Instructor RP cabinet.

2.Find the composite cable in the back of the

Polycom Instructor RP system. One end of the cable is already connected to the system. Connect the other end to your VCR or DVD player.

3. Find the stereo audio cable in the back of the Polycom Instructor RP system. One end of the cable is already connected to the system.

Connect the other end to your VCR or DVD player.

VCR/DVD

3

Connect an integrated computer to the Polycom Instructor RP system.

Once you connect the integrated computer, it becomes part of the Polycom Instructor RP system and should not be removed. This is the computer onto which you will load the SMART software and the Polycom Instructor Tools software. You can then use it to annotate and perform other SMART Board and video conferencing functions.

Instead of an integrated computer, you can connect a guest laptop to the Polycom Instructor RP system. In contrast to the integrated computer, the guest laptop can be attached and removed from the system at any time. It does not have the SMART or Polycom Instructor Tools

6

Image 12
Contents Setting Up the Polycom Instructor RP Trademark Information About this Guide Setting Up the Polycom Instructor RP Contents Setting Up the Polycom Instructor RP Setting Up the Polycom Instructor RP Unpack and Position the System Prepare to Install the Equipment You should find these accessory boxesRemove the rear access panel from the cabinet Connect the Standard Equipment Connect the Optional Equipment Connect the Optional Equipment Connect a guest laptop to the Polycom Instructor RP system Complete the Equipment Installation Power on the System Check the Screens and Run the Wizard Calibrate the Annotation Box Calibrate the Annotation Box Setting Up the Polycom Instructor RP Install the Software and Complete the Calibration Rear Projection Smart Board 3000i Installation GuideConfigure and Use the System User’s GuideTroubleshooting If the system It often means Correct it this wayIf the system It often means Correct it this way