Polycom
1725-22886-001/A
manual
Setting Up the Polycom Instructor RP
Troubleshooting
Configure and Use the System
Power on the System
Page 4
Setting Up the Polycom Instructor
RP
iv
Page 3
Page 5
Image 4
Page 3
Page 5
Contents
Setting Up the Polycom Instructor RP
Trademark Information
About this Guide
Setting Up the Polycom Instructor RP
Contents
Setting Up the Polycom Instructor RP
Setting Up the Polycom Instructor RP
Unpack and Position the System
Prepare to Install the Equipment
You should find these accessory boxes
Remove the rear access panel from the cabinet
Connect the Standard Equipment
Connect the Optional Equipment
Connect the Optional Equipment
Connect a guest laptop to the Polycom Instructor RP system
Complete the Equipment Installation
Power on the System
Check the Screens and Run the Wizard
Calibrate the Annotation Box
Calibrate the Annotation Box
Setting Up the Polycom Instructor RP
Install the Software and Complete the Calibration
Rear Projection Smart Board 3000i Installation Guide
Configure and Use the System
User’s Guide
Troubleshooting
If the system It often means Correct it this way
If the system It often means Correct it this way
Top
Page
Image
Contents
