Polycom DOC2231A manual MGC+50 Hardware Installation, Unpacking and Positioning the MGC+50

MGC+50/MGC+100 Getting Started Guide

MGC+50 Hardware Installation

Unpacking and Positioning the MGC+50

To unpack and position the MGC+50:

1.When you receive your MGC+50, inspect the equipment for damage and verify that the components match the packing slip. If you did not receive a component or if there is damage to the system, notify Polycom immediately.

Wood Packing Case

Carrying Strap

Lock in Closed Position

Lock in Open Position

Figure 2-3: MGC+50 package

2.Place the MGC+50 unit on a stable flat surface in a location that meets the MGC+50’s environment requirements, which are:

—Operating temperature: 10°–40°C (50°–104°F)

—Humidity: 15%–90% noncondensing

—Altitude: Up to 3,000m (10,000ft)

—ESD: +8 kV

2-7